Mini Breadboard, 25 points

In Stoc

Ideal for rapid prototyping and circuit testing in tight spaces, the 25-point mini breadboard offers stable solderless connections. It has a plastic housing with metal contacts, standard 2.54 mm pitch between holes compatible with common pins and modules, very compact format easy to integrate into electronic projects and kits.

0.42 €

Capacitive button TTP223, touch

In Stoc

Capacitive touch switch for opening/closing commands on electronic projects, with very low consumption and 2.5-5.5VDC. The output can be set to High or Low, and the operation can be non-latching or latching by shorting pads A and B. Compact format 11.5 x 8 mm, easy to integrate into housings and panels.

0.60 €

Active buzzer 5v

In Stoc

Active buzzer for fast acoustic signaling in electronic projects, emits sound immediately upon application of DC voltage, operates at 5VDC, does not require a PWM signal or complex driver, easily integrates into assemblies with microcontrollers and 5V sources, ideal for alarms, confirmations and sound notifications.

0.22 €

Active piezoelectric buzzer 3-24V HND-2312

In Stoc

Active piezoelectric buzzer for sound signaling in electronic and automation projects, operates directly at 3-24V without an external circuit, offers clear and stable sound, low consumption for power supply from batteries or industrial sources, compact format easy to integrate on panels and housings, ideal for alarms, status confirmations and simple warnings.

1.68 €

BNC Cable with Double Clip

In Stoc

Cable with BNC male connector and double alligator clip, ideal for quick connection to the DSO138 oscilloscope and for use with DDS function generators. Provides secure grip on test points, stable contact for accurate measurements, 1 m length for bench flexibility, compatible with applications up to 500 V and 5 A.

3.33 €

MiniUSB cable, 30cm

In Stoc

Ideal for connecting and transferring data between Arduino development boards and a PC, this 30 cm MiniUSB cable offers a stable connection for programming and serial communication, has a MiniUSB connector compatible with many modules and devices, compact length for the workbench and flexible cable that is easy to manage.

1.37 €

10-pin ribbon cable, 2X5, 20cm

In Stoc

10-pin 2x5 ribbon cable, ideal for connecting LCD modules to Ramps 1.4 shield in 3D printing and electronics projects. It has a length of 20 cm for flexible mounting, connectors on both ends for quick installation, standard pitch for wide compatibility, flat construction that reduces wiring clutter.

1.61 €

EC11 rotary encoder 20ppr 6mm shaft with switch

Rotary encoder with click 20mm EC11

In Stoc

Ideal for menu navigation and precise commands, the EC11 incremental encoder offers 20 steps with clear detents, quadrature signal on channels A and B for direction detection, 6 mm shaft for easy button coupling, plus integrated switch for quick confirmation when pressed. Suitable for development boards, control panels and 3D printer controllers.

0.87 €

Mechanical endstop SS-5GL2

In Stoc

Mechanical endstop, ideal for end position detection on 3D printers, CNC and automation. Offers precise and repeatable switching, lever actuation for easy triggering, reliable contacts for stable signal, robust construction and simple mounting on standard brackets.

1.03 €

USB 3.0 adapter module, Female

In Stoc

Allows quick connection of a USB 3.0 cable to an electronic circuit, ideal for prototyping and integration in industrial or electronic projects. USB 3.0 female connector on the module, the wiring is brought out on pins at a standard 2.54 mm pitch for compatibility with breadboards and perforated boards, it has 9 pins for clear connections and easy assembly.

0.80 €

LCD 0802 8x2

In Stoc

The 0802 8x2 LCD display is ideal for Arduino projects and other development boards, providing a simple solution for displaying messages and measured values. It has 2 rows of 8 characters, blue backlighting for good visibility, and is compatible with the I2C module for reduced wiring and quick integration. Dimensions 58 x 32 x 10 mm.

3.59 €

Relay kit with ESP8266, ESP-01

In Stoc

Compact solution for WiFi automation and remote control of consumers, combines a 5V relay with the ESP8266 ESP-01 module mounted directly in the socket. Includes 5V-3.3V step-down for powering the ESP, relay controlled from GPIO0 with LOW activation, support for Station and Access Point modes and UART communication for configuration and programming.

4.55 €

Kit of Resistors and Potentiometers A1

In Stoc

Ideal set for rapid prototyping and breadboard testing, includes carbon resistors in common values for current limiting and voltage dividers, 10K and 100K rotary potentiometers for fine adjustment, multi-color LEDs for visual signaling, 12x12 tactile buttons with caps and 2.54 pins for easy connection in Arduino and DIY electronics projects.

3.12 €

RFID Starter Kit V1, Arduino compatible

In Stoc

Complete Arduino RFID project kit, ideal for learning and rapid prototyping in the Arduino IDE. Includes Uno R3 board, RFID module with card and key fob, breadboard and cables for solderless assembly, plus a wide selection of sensors, displays, motors and modules such as relay, clock and remote control, to test various applications.

39.28 €

Line Follower Robot Kit

In Stoc

Unassembled DIY kit for line-following robot, ideal for learning and educational projects, works without programming, quickly calibrates via the two potentiometers, includes PCB with markings for assembly and requires minimal soldering knowledge, A4 route is downloaded from the Download section, powered by 2 AA batteries not included.

5.27 €

Gear wheel kit set 34 pieces

In Stoc

Complete set for making or repairing transmission mechanisms in DIY projects and prototypes, includes 34 parts with gears in various sizes, compatible transmission belts and linear guides, allows multiple combinations to adapt the transmission ratio, ensures quick assembly and stable operation in applications with motors and small mechanical systems.

3.49 €

Out-of-Stock

2WD car chassis kit, line follower

Out-of-Stock

2WD platform for line following robot projects, easy to integrate with development board, H-bridge and line sensor. It has two motors with reducer and encoders for precise speed control, steers by speed difference, includes wheels and swivel wheel for stability, acrylic chassis with mounting accessories and On Off switch for quick power supply.

7.03 €

Smart Car 4WD chassis kit

In Stoc

4WD mechanical chassis for robot and autonomous car projects, delivered without electronics, includes 4 3-6V geared motors for good traction and torque, 4xAA battery holder for powering the motors, encoders on each wheel for speed measurement and precise control, easy-to-assemble and customizable acrylic construction.

11.92 €

Smart Car Kit 4WD, Bluetooth, IR, Ultrasound

Kit Adjustable power supply 220VAC to 1.25-12VDC, LM317, with housing

In Stoc

Unassembled kit for making an adjustable voltage source, ideal for laboratory, testing and electronic projects. Powered by 220VAC and offers adjustable DC output 1.25-12V with LM317 regulator, includes all components, EU plug cable and acrylic housing, power 2W, compact dimensions 120 x 70 x 48 mm.

12.80 €

heat shrink tube kit 140 pieces

In Stoc

Ideal for insulating and protecting cable joints, this set contains 140 tubes in 5 common sizes, multiple colors for quick identification, 2:1 shrinkage ratio for firm hold, shrinks evenly when heated between 84 and 120°C, suitable for electrical, electronic and repair work.

4.76 €

LCD 12864, Blue, ST7920

In Stoc

128x64 graphic display with blue backlight and white text, ideal for Arduino projects, 3D printers and other applications where you need text and custom graphics. It uses the ST7920 controller for wide compatibility, has easy selection between parallel and SPI interface with only 3 wires, includes integrated potentiometer for contrast adjustment and clearly marked pins for quick connection.

11.03 €

RFID module kit 13.56MHz, RC522 compatible, HW-126, 3.3V

In Stoc

Compatible RC522 RFID module for Arduino projects and other development boards, ideal for reading and writing 13.56MHz cards and key fobs, includes a card and key fob tag plus pins. It operates at 3.3V with low power consumption, supports multiple MIFARE card types, offers fast transfer up to 10Mbit/s, and works reliably between -20 and 80C.

1.89 €

LCD 1602

In Stoc

Quickly displays texts and values in Arduino and automation projects, 16 characters on 2 lines, 5V power supply and HD44780 controller for wide compatibility. It has adjustable blue backlight for good visibility, can be connected in parallel or with I2C adapter for simplified wiring in just 4 wires, compact format for easy integration into panels and housings.

2.21 €

LCD 1604 Blue

In Stoc

Blue 1604 LCD display, ideal for displaying messages and parameters in projects with Arduino or other development boards, offers 16 characters on 4 lines for clear information, operates at 3.3-5V for easy integration, has compact dimensions of 86.96 x 60 x 13 mm and a visible screen of 62.3 x 27.6 mm.

6.32 €

Out-of-Stock

LCD + Control + SD Card for Ramps 1.4

In Stoc

LCD panel with controller and SD card reader for 3D printers, allows direct operation and monitoring without a PC. Offers easy navigation through menus, starting and managing prints from SD card, clear display of parameters and complete interface with encoder and buttons. Connection to Ramps 1.4 is quick with the included adapter and cables.

14.23 €

LED warning light, red, 12V

In Stoc

Red LED strobe light for clear visual signaling of moving or working equipment, 12VDC power supply, flashing mode for increased visibility, compact body 73 x 43.5 mm without base. Quick to mount with included kit, screws and two bases, one with self-adhesive pad and one for screw fixing.

5.59 €

8x8 LED matrix, MAX7219, Red, SMD

In Stoc

8x8 LED matrix with red LEDs, ideal for simple displays, texts, symbols and animations in projects with Arduino or other boards. Includes MAX7219 driver for easy control via SPI interface at 5V, offers 64 LEDs with 3mm pixel in a compact 32x32mm format. Depending on the batch, it may come with the display glued or not and with variable connection accessories.

1.57 €

Electret microphone capsule

In Stoc

The 2-terminal electret microphone capsule, ideal for Arduino projects and other development boards, converts sound into an electrical signal for audio detection, simple recording or voice commands. It has compact dimensions for easy integration, low power consumption, good sensitivity for general applications and quick connection by soldering or on a breadboard.

0.24 €

Adapter Micro USB Female to 5 pins

In Stoc

Allows quick connection of a Micro USB cable to an electronic assembly, ideal for prototyping, repairs or integration into housings. It has a 5-pin Micro USB female connector, adapter board mounting for easy soldering, compact dimensions and stable contacts for secure power and data transfer.

0.60 €

VL53L0X V2 module, flight time, laser distance

In Stoc

The ToF module with VL53L0X V2 sensor enables fast and accurate laser distance measurement up to 2 m using the time of flight of light. Includes filters for stable performance in varying ambient light and on different surfaces. Easily integrates with Arduino and other boards via I2C, operates at 2.6-3.5 V and offers Reset and Interrupt pins for advanced control.

2.49 €

Accelerometer Gyroscope I2C MPU-6500 6 axis module

In Stoc

6-axis module with MPU-6500 for precise motion measurement, ideal for robots, drones or stabilization. Integrates gyroscope and 3-axis accelerometer, communicates via I2C or SPI with Arduino and other boards, has 16 bit AD converter for detailed data, operates at 3-5V with internal regulator, compact format 15x25 mm with 2.54 mm pins.

2.38 €

ESP-01, ESP8266 adapter module

In Stoc

The adapter for ESP-01, ESP8266 simplifies prototyping and rapid integration into IoT projects, provides a stable interface for programming and testing, has easily accessible pins for connection to a breadboard, includes support for 3.3V power supply and UART serial signals, is compact and robust for use in the laboratory or production.

0.91 €

Adapter module for ESP-01, ESP8266, 5V/3.3V

In Stoc

Allows quick connection of an ESP-01 ESP8266 to Arduino and other 5V logic boards, providing stable power supply through integrated 3.3V regulator and logic level conversion on the board. Operates at 4.5–5.5V DC input, supports current up to 240mA, ensures increased compatibility in IoT projects and prototyping through simple module assembly.

2.01 €

USB 2.0 adapter module, Female

In Stoc

Allows quick connection of a USB cable to an electronic circuit, via a USB 2.0 female connector mounted on the module. The wiring is brought out on 4 pins with standard 2.54 mm pitch, easy to integrate on breadboard or PCB. Provides direct access to VBUS 5V, D+, D- and GND lines, ideal for prototyping and USB interfacing.

0.53 €

USB 2.0 adapter module, Tata

In Stoc

USB 2.0 adapter with male connector for quick integration of a USB cable into electronic projects, converts USB signals into 4 pins with standard 2.54 mm pitch for easy connection to the board or breadboard, provides clear access to VBUS 5V, D+, D- and GND, suitable for prototyping, testing and interfacing with modules.

0.53 €

Remote control module plus IR receiver kit

In Stoc

Control Arduino projects or automations with an IR remote control and HX1838 receiver set, 5V DC power supply with 3.3 or 5V compatible digital output, stable transmission at 38KHz over 5-8 m. Includes remote control, receiver module and cables for quick connection, simple configuration based on the pins in the image.

1.41 €

Metal detector kit 60mm

In Stoc

Metal detector kit ideal for DIY projects and prototypes, quickly detects metal objects up to 60 mm, offers acoustic and light signaling for immediate confirmation, operates at 3-5 VDC for easy integration into assemblies, has a compact 86 x 61 mm format suitable for installations in small spaces.

3.08 €

Mechanical endstop SS-5GL 5A125VAC

In Stoc

Mechanical travel limit switch for detecting travel ends in 3D printers, CNC or automation. Offers precise and repeatable switching, robust lever-actuated contact, load support up to 5A at 125VAC, quick mounting on standard brackets and durable housing for long-term use.

1.44 €

Solar insect

In Stoc

Solar powered educational toy, moves in the light thanks to the vibration motor, metal legs ensure stable movement, eyes and antennas animate with movement, ideal for simply demonstrating the operation of solar panels. The 0.5V green panel can be dismantled and used in small projects, it is 30 x 18 mm.

4.08 €

Wired optical endstop

In Stoc

Infrared optical travel limiter for 3D printers and CNC, ensures precise detection of travel ends for XY Z axes. Uses TCST2103 sensor for fast and stable switching, has 3 pins for simple connection, includes 800 mm cable with connector, compatible with Arduino and other development boards.

1.68 €

Cable noise filter, ferrite

In Stoc

Quickly reduces EMI RFI interference and noise on cables for a cleaner signal and stable operation of equipment. Clips on, without tools, to flexible cables with a diameter of up to 5 mm, also compatible with thinner cables from 2.5 mm. Compact housing 25 x 10 mm, 5 mm hole, ferrite with firm grip 2.5-3.0 mm.

1.25 €

Mechatronics and IoT

Subcategories