LED Matrices and Strips

Compact solution for RGB lighting effects controlled in DIY and ambient projects, with 6 SMD5050 LEDs per 10 cm, each pixel individually addressable through the integrated WS2812B controller. It operates at 5V and is easily controlled through a single data pin with Arduino, ESP32, or Raspberry Pi. Cut spacing at each LED, IP20 for indoor use.

DIY kit for assembling a 9x9 LED matrix with graphic effects, ideal for educational projects and interactive prototypes. Includes PCB and all electronic components, mounting and polarity markings are printed on the board for easy soldering. Operates at 5-9V and can be powered by USB or external battery for flexible use.

Programmable RGB LED panel for attractive messages in shop windows or on vehicles, with 16x64 resolution on a 37x9 cm surface. It is easily powered at 5V via USB and quickly controlled via Bluetooth from the Android or iOS application. Allows texts, animations and scrolling or flash effects, including logos and images created pixel by pixel. Displays up to 8 characters simultaneously, with scrolling for complete messages.

Instantly create a dynamic atmosphere in the room, synchronizing 3D RGB lighting with music or ambient sounds via the built-in microphone. Quickly controlled from the app via Bluetooth, you can choose colors and effects, adjust brightness and reaction speed. 5V USB power supply for easy use with PC, powerbank or charger.

Red LED dot matrix display with 4 8x8 panels, controlled by MAX7219, ideal for messages, graphic effects and microcontroller projects. It connects easily with only 3 data lines, is compatible with Arduino and similar boards, operates at 5V and offers 256 LEDs for good visibility. Compact size 128 x 32 x 13 mm.

Addressable RGB LED ring with 61 WS2812B 5050 LEDs, ideal for dynamic lighting effects in Arduino projects and other development boards. It is easily controlled via a single data wire, allows cascading for quick expansion, operates at 5V and provides uniform illumination over an outer diameter of 90mm.

Ideal for animated displays and DIY microcontroller projects, this flexible 16x16 LED matrix offers individual control of each LED via WS2812B. It operates at 5V, renders intense RGB colors with dynamic effects, adapts easily to curved surfaces, and allows for quick connection for expansion into larger panels.

Quickly create light displays, animations and RGB effects in Arduino projects or other development boards with 256 individually addressable LEDs in 8x32 format. The flexible membrane mounts easily on curved surfaces, operates at 5V and uses WS2812B control for intense colors and smooth transitions. Can be daisy-chained with other modules for larger displays.

4x 8x8 LED matrix display for Arduino projects and other development boards, ideal for simple texts, symbols and animations. It uses the MAX7219 driver and controls all 256 LEDs with only 3 data lines, operates at 5V, has clear blue illumination and a compact 128 x 32 x 13 mm format for easy integration into panels and housings.

Displays numbers, symbols or animations on an 8x8 LED matrix, ideal for projects with Arduino and other boards. Includes MAX7219 driver for simple 3-wire control and 5V power supply. Has INPUT and OUTPUT connectors for individual use or cascade connection with multiple modules. Comes with control board and wires for quick assembly.

Customize the lighting by individually controlling each LED from a microcontroller like Arduino, for dynamic effects and any RGB shade. It operates at 5V, has 60 LEDs per meter, 6 LEDs per 10cm segment, black PCB with double-sided adhesive tape for quick assembly, with WS2812 chip and 5050 LEDs, some batches may have a thin layer of silicone on the LED side.

8x8 LED matrix with red LEDs, ideal for simple displays, texts, symbols and animations in projects with Arduino or other boards. Includes MAX7219 driver for easy control via SPI interface at 5V, offers 64 LEDs with 3mm pixel in a compact 32x32mm format. Depending on the batch, it may come with the display glued or not and with variable connection accessories.

Ideal for uniform linear lighting in technical and decorative projects, it operates at 12V DC and offers 6000K cold light with 120 SMD 2835 LEDs per meter. It has approximately 12 lm per LED, a compact width of 8 mm for easy installation, is quickly fixed with double-sided adhesive tape and is delivered cut to the ordered length, up to 5 m.

Individually control each LED for dynamic effects and RGB animations with Arduino or other microcontrollers, 10 cm segment with 6 WS2812 5050 LEDs at 5V, light in any color thanks to RGB, white PCB and double-sided adhesive tape for quick assembly, depending on the batch may have protection with a thin layer of silicone on the LED side.

RGB decorative lighting for indoor and outdoor use, with 60 LEDs per meter and IP65 waterproof protection thanks to the transparent silicone layer. It works at 12VDC, is quickly mounted with the adhesive on the back and provides uniform light over a width of 10 mm. The price is for 1 meter, for 5 meters or multiples you receive the roll and connectors at both ends.