Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Lead-Acid battery balance module, 2S, HT-10C, with active balance and interconnection
Active balancing module for 2S Lead-Acid batteries, optimizes charging and extends battery life by transferring energy from the more charged battery to the less discharged one when the difference exceeds 50 mV. Offers up to 10A of balancing current, backlit display for quick monitoring, mounts on the rail and allows multiple modules to be interconnected in series for multi-battery systems.
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
BMS 2S module for Lead Acid batteries, with active balance and the possibility to connect several modules in series for more than 2 inserted batteries.
The active balance is advantageous because the transfer is made between cells, from the more charged cell to the more discharged cell, when the difference between them exceeds 50 millivolts. The balancing current between the cells is between 0 and 10A.
Initially connect the wires to the battery to avoid any erroneous connection to the terminals that will cause the module to burn! Make sure that you have connected the wires correctly and finally connect B1+, B1-, B2+, B2- in turn.
Connecting and disconnecting the accumulators will be done EXCLUSIVELY in the order B1+, B1-, B2+, B2- when connecting and B2-, B2+, B1-, B1+ when disconnecting . Failure to comply with this order will burn the module and lead to loss of warranty.
The module can be set in the following configurations:
B01: For Lithium batteries in the 2S configuration, nominal voltage 7.4V
B02: For Lithium batteries in the 3S configuration, nominal voltage 11.1V
B03: For Lead Acid batteries with a nominal voltage of 12V
B04: For LiFePO4 batteries in the 4S configuration, nominal voltage 14.4V
B05: For Lithium batteries in the 4S configuration, nominal voltage 14.8V
Specifications:
Battery voltage: 7 - 18VDC
Model: HT-10C
Display: Display with backlight
Installation: on the rail
Balanced current: 0 - 10A
Quiescent current: 10mA
Connection: Parallel or Series
Multiple module interconnection support: Yes
Dimensions mm: 85 x 75 x 30
Content:
1 x BMS Module
1 x Set of wires
1 x English language instructions (those presented below)
- Technology
- Lead-acid
LiFePo4
Lithium Ion - sway
- Yes
- Number of cells
- 2S
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
