Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Flexible LED Lens Set, Transparent, Cosplay, White, 6V
Two flexible LED lenses for cosplay visors and DIY projects on masks or helmets, easily bends and cuts to follow the desired shape, reflective film with dots diffuses light evenly on the surface, semi-transparent illuminated visor effect, 6V power supply with 2 CR2032 batteries in series, button support and cables for quick assembly.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Set composed of two flexible LED lenses, used in the creation of cosplay costumes, is a visor-type light module, made of flexible and foldable material, designed for DIY projects on masks and helmets.
It can be easily bent to follow the curve of a visor, can be cut to the desired shape with scissors, and the reflective film helps distribute the light for an even effect. The surface of the film is equipped with reflective dots that distribute the LED light across the entire surface.
The lens remains semi-transparent, so you maintain a discreet visual effect and can achieve a lighted visor look without completely covering the eye area.
The module is powered by a CR2032 battery, it is easy to integrate into different projects, and the cables and battery holder allow for quick assembly inside the mask. To avoid the LEDs from detaching, the white reflective film should not be removed in the area where the LEDs are, if you need to cut, cut the film only in other areas.
Requires 2 CR2032 batteries connected in series to operate. These are not included.
It comes with reflective film on both surfaces of the lens. These must be peeled off if you want to use them transparently BUT BE CAREFUL, keep the shiny surface at the base of the lens, where the power wires enter , as this helps diffuse the light towards the lens.
Specifications:
Supply voltage: 6VDC
LED Color: White
Product type: flexible LED lens for DIY projects
Power supply: 2 x CR2032 battery (not included)
Transparency: semi-transparent
Lens material: flexible, foldable material
Batteries included: no
Lens size: 27.5 x 76.5mm
Useful luminous size: 27.5 x 69.5mm
Thickness: 2 mm to 2.2mm
Approximate cable length: 20cm plus 14cm
Approximate battery holder size: 50 x 25 x 5mm
Use:
Check the size of the visor and position the lens inside the mask or helmet.
If you need a different shape, cut it with scissors to the desired size, but keep the shiny surface at the base of the lens, where the power wires enter.
Do not remove the white reflective film in the LED area, if you want to see the outside, just cut the film in other areas with a cutter
Install the CR2032 batteries in the holder, according to the + and - markings, and check the ignition before final fixation.
You can turn the power on or off from the button integrated into the battery holder.
Secure the module to the helmet or mask using a method appropriate for your project, such as tape, clips, or compatible adhesive.
If an LED comes off during DIY, you can fix it locally with glue, then test the light again for uniformity.
IMPORTANT: The light comes from the wires, which is why the section near the input wires should NOT be cut.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
