Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Drone motor 2207, XING-E Pro, 1800KV
1800KV FPV motor for 3-6S setups, provides strong traction and fast response for freestyle or racing. 5mm steel shaft and NSK bearings increase shock resistance and lifespan, N52H magnets maintain performance at high temperatures, 16x16 mm mounting ensures quick mounting on most frames.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
XING-E Pro 2207 motor, for FPV drones, equipped with a 5mm high-strength steel shaft, N52H high-temperature magnets and NSK bearings.
This is a powerful and durable motor with a solid reputation for durability. The standard 16x16mm mount allows for quick mounting to most FPV frames.
The motor is 3-phase and can be controlled using an ESC of at least 30A (per channel).
Specifications:
Model: XING-E Pro 2207
KV: 1800KV
Recommended battery: 3-6S LiPo
Motor diameter: 28.5mm
Motor height: 19.7mm
Interphase resistance: 81.5m Ω
Maximum current: 35.22A
Maximum power: 845.3W
Shaft diameter: 5mm
Output shaft length: 13.5mm
Configuration: 12N14P
Mounting holes: 16x16mm, diameter 3mm
Bearings: NSK
Magnets: N52H
Weight: 33.8g
Use:
It mounts to the frame using the included screws and it is recommended to use an ESC compatible with the motor. For maximum performance and durability, it is recommended to check the propeller and properly tighten the shaft before use.
During assembly, make sure that the screws do not touch the motor coil as this will short the motor.
Package contents:
1 x Engine
4 x M3*8 screws
1 x M5 flanged nylon insert lock nut
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
