Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
DJI O4 Air, FPV, 1-3S unit
Digital system for FPV HD video transmission on drones under 2 inches, ultralight 8.2 g. Offers 4K/60fps recording with 23 GB internal storage, 1080p live up to 100 fps, low latency down to 20 ms in Racing mode and transmission range up to 10 km. Compatible with DJI Goggles 3, N3, 2 and Integra, plus DJI FPV Remote Controller 2 and 3.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The DJI O4 Air Unit is a high-definition digital video transmission system designed to enhance the FPV flight experience with drones under 2 inches, where weight is essential. With a compact and lightweight design, weighing only 8.2 grams, this module integrates a 1/2-inch CMOS image sensor, capable of recording video at 4K/60fps resolution, providing clear and detailed images, which can be stored locally in the built-in 23GB memory.
The system uses DJI O4 transmission technology, ensuring low latency of up to 20ms and a maximum transmission range of 10km, enabling responsive control and high-quality real-time images. It also supports Racing mode, with a minimum latency of 20ms, ideal for FPV racing with up to eight drones simultaneously.
Compatibility with Canvas mode and Betaflight OSD settings allows you to customize the data displayed on the FPV goggles screen, providing precise control and flight information at your fingertips. Its lightweight design and small size make it suitable for drone frames up to 2 inches, facilitating flexible assembly for various creative flight scenarios.
Specifications:
Model: DJI O4 Air Unit
Supply voltage: 1S - 3S LiPo (3.7 - 12.6VDC)
Internal storage: 23 GB
Image sensor: 1/2 inch CMOS
Live broadcast: 1080p at 100fps
Weight:
Transmission module (without camera module): approximately 5.1 g
Transmission module (with camera module): approx. 8.2 g
Antenna: approximately 0.75 g
Dimensions:
Transmission module: 30×30×6 mm
Camera module: 13.44×12.36×16.50 mm
Video resolution:
4K (4:3): 3840×2880 at 30/50/60fps
4K (16:9): 3840×2160 at 30/50/60fps
Minimum latency:
With DJI Goggles 3 in Racing mode: 20 ms
With DJI Goggles N3 in Racing mode: 24 ms
With DJI Goggles 2 or Goggles Integra: under 35 ms
Maximum transmission range:
10 km (FCC)
8 km (EC)
Compatibility:
DJI Goggles 3, DJI Goggles N3, DJI Goggles 2, DJI Goggles Integra
DJI FPV Remote Controller 2 and 3
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
