Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Development board with Raspberry RP2040, Cortex M0, 2MB Flash
Compact development board for DIY projects and rapid prototyping, based on the RP2040 dual core Cortex-M0+ at 133MHz, with 2MB Flash and 264KB SRAM. Offers 29 GPIO with PWM and ADC, I2C UART SPI interfaces and 8 PIO for advanced control. Easily programmed via USB-C with drag and drop and is MicroPython and CircuitPython compatible, includes addressable RGB LED and temperature sensor.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
RP2040-Zero is a compact microcontroller development board, based on the RP2040 chip from Raspberry Pi. This board offers a powerful and versatile solution for DIY projects, rapid prototyping and integrated applications.
The compact dimensions of the RP2040-Zero make it suitable for projects that require a small profile, such as wearable devices or other applications where space is limited.
The board offers an addressable RGB LED integrated on the GP16 pin.
It comes equipped with the RP2040 chip, with two ARM Cortex-M0+ cores, offering solid and efficient performance for managing complex tasks. The board includes 264KB of SRAM memory and 2MB of flash memory to store the code and data needed for projects.
Connection interfaces are abundant on this development module and include digital and analog GPIO pins, PWM pins, and I2C, UART, and SPI interfaces, allowing easy connection of sensors and other peripheral components.
The board has support for several programming languages, including MicroPython and CircuitPython, which facilitates the process of programming and developing applications for users with programming experience or for those who want to learn to program.
Accelerated FP (Floating-Point) type libraries have been integrated in this product to perform mathematical calculations in an efficient and fast way, using the hardware and software optimizations available on the chip. An integrated temperature sensor and a precision timer clock were also integrated.
It can be programmed in drag and drop mode, using USB mass storage.
The board supports Low-Power sleep modes and Dormant mode (inactive device until receiving an input).
The I/O pins are on 3.3V. Do not use more than 3.3V, otherwise the board will burn . For use with 5V sensors and modules, use a logic level translator.
Specifications:
Supply voltage: 5VDC, via USB
Logic voltage: 3.3V
Chip: Raspberry Pi RP2040 with two ARM Cortex-M0+ cores
Processor frequency: 133MHz
SRAM memory: 264KB
Flash memory: 2MB
Interfaces: digital GPIO, analog GPIO, PWM, I2C, UART, SPI
Compatibility with programming languages: MicroPython, CircuitPython
USB interface for programming and communication with the computer: Type-C
Temperature sensor: Yes
Clock: Integrated, precision
Integrated FP libraries: Yes
GPIO pins: 29, only 20 accessible via header pin , the rest just tinned
Pins: 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels
Programmable state machines I/O (PIO): 8
RGB LED: WS2812, addressable
Dimensions mm: 23.5 x 18mm
Pinouts:
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
