Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
D1 MH-ET MiniKit development board, ESP32, WiFi + Bluetooth 4.2, ESP8266
Compact board for IoT prototyping and automation, with ESP32-WROOM-32 dual core and 2.4GHz WiFi connectivity plus Bluetooth 4.2 BLE for fast communication. Wemos D1 Mini format, compatible with D1 shields on the white pin row, 5V power supply with 3.3V logic, 4MB Flash and 530KB SRAM, antenna integrated into the PCB for easy installation.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
MH-ET Live MiniKit development board with WiFi ESP8266 and integrated Bluetooth 4.2. It uses the ESP32-WROOM-32 module, based on a dual core CPU and WiFi-BT-BLE MCU. It uses the Wemos D1 Mini format, which is why it is compatible with shields for D1, which can be connected to the row of pins colored in white.
Specifications:
Supply voltage: 5V
Operating voltage: 3.3V
WiFi frequency: 2.4GHz
Protocol: 802.11 b/g/n/d/e/i
Sensitivity: -98dBm
Output power: 16.5dBm
Data speed: 54Mbps
Serial interface: I2C, I2S, SPI, UART
SRAM memory: 530KB
Flash memory: 4MB
Antenna: integrated in the PCB
Useful Links:
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (2) - Review moderation
Din pacate nu a funcsionat. A trebuit sa schimb modulul wroom32 cu altul ca sa mearga.
Nu il pot conecta la senzorul de temperatura, pin 21 22 sunt ocupate de display, am incercat nenumarate pinuri, fara rezultat. Nu gasesc nici un exemplu online.
