Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Capacitive touch module, 3A, with dimmer, 5-20VDC
Capacitive touch control with dimmer for LED strips and DC 5-20V consumers, recommended 12V, supports 3A in use and up to 10A in peak, allows smooth brightness adjustment with memory and gradual on/off, works through glass or acrylic up to 6mm, includes reverse polarity protection and red-blue LED indicator for status.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
the c
Capacitive touch switch module, capable of up to 10A peak current, designed to provide an efficient and easy-to-use solution for controlling various electronic applications, such as LED strip lighting or any other usable consumer within the voltage and current specifications of the module.
It supports a voltage range between 5 and 20VDC, recommended 12VDC, with the ability to handle a high current of up to 10A in peaks, recommended 3A for operation , making it ideal for applications that require a high level of power.
It supports gradual brightness adjustment, allowing users to adjust the light to the desired level in a smooth and continuous manner.
It is equipped with red and blue LED indicators to show the status of the module. The indicator LED is red, and when the sensor is touched, the output turns blue.
The module can be configured in different operating modes, including memory for the brightness of the last setting, gradual lighting at start and stop, and instant lighting at the brightness setting.
Specifications:
Model: OE-TP dimming (10A)
Power Supply: DC 5 - 20VDC (recommended 12V power supply)
Output Current: Sink current MAX 10A (recommended 3A in working mode)
Protection function: Protection against power polarity reversal
Sensitive Indication: The red light indicator at the exit
Mode of Operation: Configurable (default: with memory for gradually adjusting the brightness, with dimming)
Touch Distance: Less than 6mm (through glass or acrylic)
Quiescent Current: Less than 5mA
Operating Temperature: -40 - 85°C
Setting Modes:
Memory Mode: The brightness of the last setting is stored as the default brightness at startup. The default value is lost when the power supply is interrupted.
Gradual Illumination: The brightness gradually increases when starting up to the desired setting and gradually decreases when it is turned off.
Instant Illumination: The brightness directly reaches the set level when starting and stops instantly when closing.
Long Touch: Allows the gradual adjustment of the brightness through a prolonged touch.
Login:
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (2) - Review moderation
Functioneaza exact ca in descriere! nu sunt probleme! Vinzatorul este foarte promnt si atent la detalii .Felicitari pentru prontitudine. Eu personal mi a m printat niste suporti 3d la 45 de grade,am pus 2x 1,5 metrii de bara de leduri de aluminiu cu leduri si touch senzorul pe fiecare bara si am obtinut niste lampi de efect si dizain minimalist pe speteaza de la patul din dormitor, alimentate la 5 volti 3.3 A. Functioneaza fara probleme si pot regla prin atingere de la minim la maxim ceea ce este foarte tare ca intensitate luminoasa. Module foarte practice!
Am cumparat aceste module de la firma dumneavoastra. Felicitari pentru promptitudine,pentru relatia cu clientul si mai ales pentru modul de ambalare si transport. Felicitari managementului firmei,astazi este putin probabil sa gasesti o firma care sa te atensioneze asupra calitasi produselor atat pozitiv cat si negativ, sa verifici coletul in vederea integritasii si cantitasii din colet. Totul la superlativ!
