Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
4 relay module with remote control, 12V, 433Mhz, programmable
Remotely control up to 4 circuits or consumers at 12V, ideal for automation, lighting or DIY projects. It operates on 433Mhz and includes a remote control, is quickly programmed from the button with momentary, ON OFF or latched modes, has a decoder with a 2272 chip for stable control and comes with a plastic box for mounting and protection.
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
4-channel relay control module with remote control for remote operation, frequency 433Mhz.
The package also includes a plastic box for the relay board.
To change the battery, unscrew the screw on the back and open the remote control.
Specifications:
Supply voltage: 12VDC
Number of channels: 4
Remote control operating frequency: 433Mhz
Remote control included: Yes
Battery: 23A, 12V (not included)
Decoder: Chip 2272
Operating modes:
1 - Momentary. Relay activated as long as you press the button on the remote control.
2 - With retention, ON/OFF with each key press
3 - Latched. Each time a channel is activated, it will turn on and the previously selected channel will turn off.
4 - Mixed, 2 Channels one setting, 2 Channels another setting
Dimensions mm: 170 x 110 x 50mm
Instructions:
Power up the module, wait for the LED to stay on and press the button 8 times to reset the system. A series of LED flashes will confirm the action. Wait until the LED is steady on. Do not use the remote control yet.
You can program the module in the following ways:
1 - Momentary - Press the button on the board once. When the LED stays on brightly, press a key on the remote control.
2 - With hold, ON/OFF - Press the button on the board 2 times . When the LED remains on brightly, press a key on the remote control.
3 - Latched - Press the button on the board 3 times . When the LED stays on brightly, press a key on the remote control.
4 - 2CH 1, 2CH 2 - Press the button on the board 4 times . When the LED stays on brightly, press a key on the remote control.
5 - 2CH 1, 2CH 3 - Press the button on the board 5 times . When the LED stays on brightly, press a key on the remote control.
6 - 2CH 2, 2CH 3 - Press the button on the board 6 times . When the LED stays on brightly, press a key on the remote control.
7 - 2CH 3, 2CH 3 - Press the button on the board 7 times . When the LED stays on brightly, press a key on the remote control.
8 - RESET - Press 8 times to reset the settings.
Important: Changing the settings can only be done after a RESET.
Add remote control: Press the Learn button once and then press a key on the new remote control. Attention! The new remote control may differ in that its buttons may operate different relays than the remote control that comes with the module. Changing the buttons between them is not possible. However, you can move the rubber key.
Assembly diagram:
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (4) - Review moderation
am cumparat acest produs si pot sa spun ca sunt multumit de el. raport pret calitate buna!
aaaa
-
Util
