Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
230VAC circuit breaker, automatic and manual switch
Provides fast and safe switching between main and reserve source for power continuity in residential, commercial or industrial applications. Operates at 230VAC 50/60Hz, supports up to 63A and offers automatic or manual mode with LED indicators for N and R. Includes MCB overload and short circuit protection and allows complete shutdown of power to the consumer.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Automatic transfer switch designed to ensure fast and safe switching between two electrical power sources, being ideal for systems requiring continuity of operation, such as residential, commercial or industrial installations. It supports a nominal current of up to 63A and is compatible with 230V AC, 50/60Hz networks.
The device allows both automatic and manual switching, providing flexibility in use. It also offers the possibility to completely turn off the power to the consumer.
Specifications:
Nominal voltage: AC 230V
Model: GCQ2-63/2P
Type: dual automatic transfer switch (ATS)
Number of poles: 2P
Rated current: 63A
Frequency: 50/60Hz
Operating modes: automatic and manual
Protection: MCB for overload and short circuit
Applications: residential, commercial, industrial
Weight: 1174g
Dimensions: 150 x 138mm
Use:
Connect the two power sources to the designated terminals, respecting the polarity and the cable section appropriate to the rated current. Select automatic mode for instant switching in case of failure of one source or manual mode for direct control. The operating mode is selected from the slider above the indicator LEDs.
N indicates the main power source and R indicates the backup power source. Switching is done automatically or manually between N and R.
The module also provides control signal pins for connecting the ATS to an external control or monitoring system.
Connectors Order:
| Pin No. | Function | Typical use |
|---|---|---|
| 1 | Standard electrical instruction | Signal to turn on the main source |
| 2 | Usual closing instruction | Signal to turn off the main source |
| 3 | Common zero control | Common point for signals 1 and 2 |
| 4 | Spare electrical instruction | Signal to start the backup source |
| 5 | Alternative closing instruction | Signal to turn off the backup source |
| 6 | Common zero reserve | Common point for signals 4 and 5 |
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
