Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Voltage to Frequency converter module, 0-10V, 0-10KHz
It converts a 0-10V analog signal into a 0-10 kHz proportional frequency, ideal as a pulse source for drivers and control systems. It operates at 13.5-30VDC, offers OCOUT output for connection to the driver and FOUT for general use, and the integrated potentiometer allows fine voltage-frequency calibration for precise response in the application.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Analog voltage to PWM signal converter module. This is a device that converts a controllable voltage signal into a frequency signal, being useful as a pulse source for drivers and control systems.
It operates at a power supply between 13.5V and 30V, receives a 0-10V control signal at the input and generates a proportional frequency at the output in the range 0-10 kHz. The module allows fine calibration of the voltage-frequency correspondence via potentiometer, so you can precisely adjust the response depending on the application.
For use with a driver, the output can be used as a pulse signal, with common anode wiring, using the OC-OUT connection to the driver's pulse input.
The output signal can be adjusted using the potentiometer integrated into the module to modify the signal accuracy.
Specifications:
Supply voltage: 13.5 - 30VDC
PWM output voltage range: 0-10V
PWM signal frequency: 0 - 10KHz
Output types: OCOUT for driver and FOUT for general output
Pinout:
| Section | Pine | Role | Details |
|---|---|---|---|
| Module power supply | VCC | feeding | 13.5 - 30VDC |
| Module power supply | GND | Mass | GND |
| Analog signal input | WINE | Analog input plus | 5-10VDC |
| Analog signal input | GND | Entrance table | GND |
| Signal output | OCOUT | Open collector output | For driver, recommended for driver modulation |
| Signal output | FAIL | Frequency output | General frequency output |
Use:
Connect the module power to VCC and GND using a source between 13.5V and 30V.
Apply the 0-10V control signal to IN+ and IN- respecting the polarity.
For general frequency output, use FOUT together with GND.
To connect to the driver as a pulse signal, use common anode wiring like this:
OCOUT: connected to PUL- or PUL of the driver.
12-30: connected to PUL+ or to the common +5V terminal of the driver.
Calibrate the voltage-frequency correspondence in the potentiometer until you get the desired response.
Common GND is required between power GND and signal GND.
Precautions:
Respect the voltage ranges for power supply and 0-10V input.
When using 12V power, a 330R current limiting resistor is required.
When using 13-24V power supply, a 2.7K.
Use OCOUT when modulating a driver, and FOUT when you need a general frequency output.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
