Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
UV-C Germicidal LED, SMD 3535, 265-285nm, disinfectant
Germicidal UV-C LED for UVGI projects, ideal in air, water and surface disinfection systems, emits at 265-280 nm for high efficiency, compact SMD 3535 format 3.5x3.5 mm, 3-6 V power supply at 40 mA, wide angle 120° with quartz glass lens for good transmittance.
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
UVGI LED with UV-C light, type 3535, with disinfectant effect.
WARNING! Do not expose yourself directly to UV-C radiation! UVC radiation is EXTREMELY harmful to the eyes and skin! It can cause burns and skin cancer.
UV-C light has a short wavelength, which is naturally completely absorbed by the ozone layer, and has a disinfectant effect of around 99.99% by destroying DNA sequences.
Used in systems for disinfecting water, air, and surfaces.
The exposure time required for disinfection varies depending on the distance between the UVC radiation source and the target surface.
Specifications:
Type: UVC
Supply voltage: 3 - 6V
Current: 40mA
Wavelength: 265 - 280NM
Angle: 120 degrees
Lens: quartz glass
Chip material: InGaN
Luminous intensity: 3-5MW
Lead wire: 99.99% Gold
Light response time: <100ns
Applications: Sterilization
LED dimensions mm: 3.5 x 3.5mm
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (1) - Review moderation
Un led foarte mic dar care asi face treaba, funcsie de proiectul la care al folosesti...
