Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
Touch switch module, 25mm penetration, 12-24V, 60W, dimmable
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
All orders minimum 100€
LED touch switch FTS-02A, dimmable, is a modern and innovative solution for discreet and efficient control of lights. With an invisible design, this lighting switch preserves the aesthetics of different surfaces, while offering an intuitive experience by simply touching the surface.
The lights are activated only by touch, the switch remaining hidden, for an impeccable aesthetic. A short press switches between ON and OFF, and a long press allows adjusting the intensity (Dimmer) between 10 and 100%.
It has a maximum capacity of 5A/60W, at a voltage between 12 and 24VDC, being compatible with multiple types of lighting fixtures, from lamps and ceiling lights to LED strips.
It is mounted directly on wooden, plastic or glass panels, without the need for other equipment.
It works on voltages of 12V and 24V, adaptable for different lighting systems, and represents an elegant alternative to traditional switches.
Specifications:
Supply voltage: 12-24VDC
Maximum load: 5A / 60W
Material: Plastic
Switch type: Touch On/Off
Detection radius: ≤25 mm ( May vary )
Compatible material: Wood, Plastic, Glass
Model: FTS-02A
Dimensions: 48 x 48 x 6mm
Use:
Choose a wooden panel with a maximum thickness of 25 mm for mounting. Fix the switch behind the panel, in the desired control area.
Connect the switch to the power source (12V or 24V) respecting the voltage specifications of the lighting fixtures. The sensor has two groups of wires. The first set is for input, the second for output, marked with IN and OUT. The power source between 12V and 24VDC will be connected to IN, the lighting fixture or LED strip will be connected to the output.
Once mounted, the switch can be used by simply touching the surface of the panel, turning the lights on or off.
A short touch switches between ON and OFF. A long touch allows dimming of the light.
