Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Mini Tesla Speaker Coil Kit
Kit for assembling a mini Tesla coil with plasma effect and sound playback by connecting to an audio source. Allows the LEDs to light up when approached by the generated electric field, operates at 15-24VDC and offers Jack 3.5 audio input, power up to 15W. Delivered unassembled, requires electronics knowledge for assembly.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The "Mini Tesla plasma coil speaker" kit gives you the possibility to build a Tesla coil that generates plasma and sound by connecting it to an audio source. The electric field generated will light up LEDs when brought close to the coil.
The kit does not include instructions other than the information printed on the PCB. Electronics knowledge is required to assemble the kit.
Respect the polarity of the components (capacitors, LEDs, etc.). The wire must form a loop around the coil without touching it.
The product is safe as it does not pose a risk of electric shock (relatively low power).
Due to the electromagnetic field generated by the coil, do not keep electronic devices such as phones, mp3 players, etc., near it.
The product comes as an unassembled kit.
The power supply is not included.
Specifications:
Input voltage: 15-24VDC
If the current is too high, the two heat sinks will overheat, leading to kit damage. Provide active cooling for the heat sinks or reduce the current. We do not offer warranty for products damaged by improper use.
Power: 15W
Audio input: 3.5mm Jack
Electronic Diagram:
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (10) - Review moderation
1. Schema nu concorda cu pcb-ul. La https://www.youtube.com/watchav=P1o13JeH2iI, min 1.38 se vede schema corecta. Led-ul albastru nu este in serie cu secundarul, doar au un punct comun in baza tranzistorului BD243 2. Sensul infasurarii primare este f important. Daca la prima alimentare se aprinde doar led-ul rosu, inversati sensul primarului (firul din jurul bobinei) si veti avea descarcare corona 3. Pentru partea audio. Pe pcb, polaritatea condensatorului electrolitic este inversata. 4. Atentie la curentul absorbit. Cand incepe sa miroasa rau a incins, opriti. Folositi sursa cu limitare de curent pt teste. 5. In rest e ok. Isi face treaba. Am construit, am testat.
Inainte sa ma apuc cum sa leg LEDurile ca in schema sau ca pe placaa
Nu are descriere sau schema circuitului, iar cele doua leduri sunt puse in interiorul bobinei, contrar tuturor imaginilor sau filmuletelor de pe net
Dupa ce am ansamblat kit-ul a mers din prima si sunt multumit de el cum merge ,dar nu sunt multumit de faptul ca anloc de un rezistor de 10kohm am primit unul de 100 ohm si ca nu vine cu niciun fel de instrucsiuni.
Usor de asamblat, daca ai cunostinte minime de electronica. Ghidusia cu aprinsul neoanelor face senzatie printre copii, in schimb refuza sa se comporte si ca difuzor (poate chiar trebui rotit condesatorul electrolitic, asa cum se sugereaza in alt comentariua).
