Micro servo motor, D1302, 1.7 grams
zoom_out_map
chevron_left chevron_right

Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.

The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.

The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.

Micro servo, D1302, 1.7 grams

Subminiature digital servo for RC models and indoor drones, ideal when you need precise control in very small spaces. It weighs only 1.7 g and has a compact housing, uses a coreless motor for fast response up to 0.04 s at 60°, offers torque up to 0.17 kg.cm at 4.2 V and operates stably between 3.7 and 4.2 V with JR type quick connection.

13.34 € Tax included

11.02 € Tax excluded

No reviews yet
1-2 zile
check In Stoc

Shipping by Thursday 27 August

Close

This product has a warranty of 2 years.

INTERNATIONAL DELIVERY
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
FAST DISPATCH 24H
We ship from our stock within 24H
LOYALTY POINTS
You earn points with every order, worth 5%.

AFRC D1302 subminiature digital servo, ideal for small applications such as RC airplanes, cars or indoor drones. With a compact design and an extremely low weight of only 1.7g (without cable), this servo is optimized for high performance in confined spaces.

It uses a coreless motor and digital control, offering a powerful torque of up to 0.17kg.cm and a quick reaction speed of 0.04 sec for a 60° rotation.

It is compatible with a range of voltages between 3.7V and 4.2V.

The actuator uses plastic gears and comes with a JR type quick connector.

Its control is simple, having 3 wires available, two for power and one for signal.

 

Specify:

Model: AFRC D1302

Dimensions: 13.5 x 6.2 x 16mm

Weight: 1.7g (without cable)

Operating voltage: 3.7V ~ 4.2V

Engine type: Coreless

Gear type: Plastic

Control system: Control by pulse width modulation, 1520uS / 333Hz

Maximum rotation angle: 100° (50° ±5°)

Wire length: 110mm

Direction: Counter-clockwise (CCW) / Pulse width 1500 - 2100 usec

Compatible connectors: JR

Operating temperature range: -20°C ~ +60°C

 

Couple:

3.7V: 0.15 kg-cm (2.08 oz-in)

4.2V: 0.17 kg-cm (2.36 oz-in)

 

Speed:

3.7V: 0.06 sec / 60°

4.2V: 0.04 sec / 60°

 

Wires:

Brown: GND

Red: VCC

Yellow: Signal

 

Dimensions:

 

Content:

1x Servo with cable

1x Set of arms

9812

Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.

Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.

Avertismente generale de siguranta:

Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.

Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.

Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.

Nu lasati produsul alimentat nesupravegheat in timpul testelor.

Produsul nu este jucarie si nu este destinat copiilor.

Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.

Identificare produs:

Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.

Producator / Importator / Distribuitor:

Sigmanortec S.R.L.

Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania

E-mail: [email protected]

Website: www.sigmanortec.ro

Persoana responsabila in UE:

Sigmanortec S.R.L.

Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania

E-mail: [email protected]

Documentatie si siguranta:

Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].