Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.

The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.

The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.

IC Socket, TQFP32 to DIP32, SA636

Adapter socket for programming and testing TQFP32 or QFP32 ICs via DIP32 interface, ideal for quick conversion from SMD to easy-to-use format on programmers and breadboards. It has 32 pins in 8x4 arrangement with 2 rows of 16 pins output, cap fastening for secure contact, compatible with chips such as Mega328p, model SA636.

24.08 € Tax included

19.90 € Tax excluded

No reviews yet

1-2 zile

Shipping by Thursday 27 August

This product has a warranty of 2 years.

INTERNATIONAL DELIVERY
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.

FAST DISPATCH 24H
We ship from our stock within 24H

LOYALTY POINTS
You earn points with every order, worth 5%.

The TQFP32, QFP32 to DIP32 adapter is designed to allow programming and testing of TQFP32 or QFP32 integrated chips (ICs). It provides a convenient interface between the IC chip and the programmer or test device. The pins of the adapter are compatible with Breadboard and programmers with pin sockets, allowing in this way the easy programming of SMD type chips with 32 pins (8 pins per side).

Supported chip type: The adapter is designed for TQFP32 or QFP32 type integrated chips. This means that it can be used with a wide range of chips that fit this configuration.

Pin configuration: The adapter has a TQFP32 or QFP32 connector on one end, which matches the IC chip, and a DIP32 connector on the other end, which matches the programmer or test device. The pin configuration ensures a correct connection between the IC chip and the programming or testing equipment. It has 32 pins, that is, 4 sides of 8 pins each. The output of the adapter is predisposed to 2 lines of 16 pins each.

Easy to use: The adapter is designed to be easy to use. The TQFP32 or QFP32 IC chip is inserted into the socket and the cover that keeps the IC pressed and the pins in contact is closed, and then the adapter is inserted into the programmer or test device using the DIP32 connector. This allows programming or testing the IC chip in a convenient and safe way.

Compatibility: The adapter is compatible with a wide range of programmers and test devices that support the DIP32 interface. Make sure that the programmer or test device you intend to use is compatible with the DIP32 connector.

Specifications:

Number of pins: 32

Output pins: DIP32

Compatible chips: TQFP32 or QFP32, such as the Mega328p chip

Model: SA636

Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.

Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.

Avertismente generale de siguranta:

Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.

Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.

Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.

Nu lasati produsul alimentat nesupravegheat in timpul testelor.