Elements of Connection

Elements of Connection

T8 blocker
T8 blocker
In Stoc
Provides firm fixation of an 8 mm guide shaft, preventing slipping and maintaining the position of components in mechanical assemblies. It has an 8 mm internal diameter for precise fit, quick assembly, robust construction for industrial use, supports stable and reliable operation over time.
7.89 RON
Flexible coupling 5mm*8mm
Flexible coupling 5mm*8mm
In Stoc
Provides secure coupling between two shafts with different diameters, ideal for precision transmissions in CNC, 3D printers or automation. Compensates for small misalignments and reduces vibrations, quickly mounts on 5mm and 8mm shafts, has a compact construction with a height of 25mm for confined spaces and helps protect gear components.
6.75 RON
GT2 closed belt 6mm 752mm
GT2 closed belt 6mm 752mm
In Stoc
Ideal for precise transmissions in 3D printers, CNC or automated mechanisms, the closed GT2 belt ensures stable synchronization and smooth movements. It has a circumference of 752mm and a width of 6mm, GT2 profile for precise coupling, construction with textile inserts for increased resistance to stretching and wear, works reliably in continuous use.
14.18 RON
Mechanical endstop SS-5GL2
Mechanical endstop SS-5GL2
In Stoc
Mechanical endstop, ideal for end position detection on 3D printers, CNC and automation. Offers precise and repeatable switching, lever actuation for easy triggering, reliable contacts for stable signal, robust construction and simple mounting on standard brackets.
5.23 RON
GT2 timing pulley 20 teeth, 5mm shaft
GT2 timing pulley 20 teeth, 5mm shaft
In Stoc
Ideal for precise GT2 belt drive in stepper motor applications, ensures stable transmission and correct alignment in 3D printers and CNC mechanisms. It has 20 teeth for constant pitch, is compatible with 6 mm belt, mounts on 5 mm shaft, compact construction 16 mm long and 15.8 mm thick.
4.67 RON
Kit 300 Stainless Steel Philips Screws
Kit 300 Stainless Steel Philips Screws
In Stoc
Practical set for assemblies and repairs in electronics, fine mechanics or DIY projects, includes 300 stainless steel Philips screws, resistant to corrosion and wear, suitable for precise and secure fastenings, M3 thread for wide compatibility, delivered in a compartmentalized box for quick organization and easy access.
66.20 RON
Hexagonal pillar M3x10
Out-of-Stock
Hexagonal pillar M3x10
Out-of-Stock
Male and female hexagonal spacer pillar with M3 thread, ideal for mounting and secure spacing between PCB boards, modules and housings. Provides 10 mm separation on the hexagonal body, has 6 mm thread for firm grip, hexagonal shape for easy tightening with wrench, ensures precise alignment and vibration resistance in electronic and industrial assemblies.
2.66 RON
M3x25 hexagonal pillar
Hexagonal pillar M3x25
In Stoc
Hexagonal male-female spacer pillar with M3 thread, ideal for mounting and precise spacing between PCB boards, panels or housings in electronic applications. It has a 25 mm hexagonal body for easy wrenching, 6 mm thread for secure fixation, ensures stable alignment and reduces the risk of contact between components.
3.03 RON
M3x50 hexagonal pillar
Hexagonal pillar M3x50
In Stoc
Male-female hexagonal spacer with M3 thread, ideal for mounting and spacing PCB boards, panels or housings in electronic equipment. Provides precise 50 mm separation on the hexagonal body, ensures firm grip with 6 mm thread, allows easy tightening with a wrench due to the hexagonal shape, reduces the risk of deformation and improves assembly alignment.
3.34 RON
Linear bearing LM8UU
Linear bearing LM8UU
In Stoc
Linear bearing for 8 mm axis guides, ideal for smooth and precise movements in CNC mechanisms, 3D printers and automation. Ensures efficient sliding with low friction, compact and robust construction, quick mounting in standard supports. Dimensions 8x15x24 mm for easy compatibility in technical projects.
4.90 RON
Pneumatic connector PC4-M6, CR10
Pneumatic connector PC4-M6, CR10
In Stoc
Quick pneumatic connector for 4 mm PTFE tube, ideal for Creality Ender 3D printers and other Bowden systems with M6 threaded extruder. Ensures firm fixation of the tube and constant filament supply, easy to assemble, has a precise M6 thread, is made of brass for strength and durability.
6.43 RON
Set of screws, spacers and nuts, M3, nylon, 300 pieces
Set of screws, spacers and nuts, M3, nylon, 300 pieces
Last items in stock
Complete kit for electronic assemblies and PCB mounting, ideal for secure fixing and spacing between boards and housings. Includes 300 pieces of M3 lightweight and insulating nylon, with screws, nuts and spacers in multiple lengths, corrosion resistant and suitable for applications where metal is not recommended. Supplied in a transparent organizer box for quick access and order.
70.08 RON
Connector PC4-01, Yellow, M10
Connector PC4-01, Yellow, M10
In Stoc
Pneumatic connector for 4mm PTFE tube, ideal for 3D printers, especially for mounting in the E3D print head assembly with M10 thread. Ensures firm fixation of the tube by locking, the tube cannot be pushed or pulled, does not allow the tube to pass beyond the thread. Inner diameter 3mm, yellow finish for quick identification.
5.57 RON
Connector PC6-01, Yellow, M10, 6mm
Connector PC6-01, Yellow, M10, 6mm
In Stoc
Pneumatic connector for quick and safe connection of PTFE tubes with 6mm outer diameter, ideal in compressed air installations and automation. It has M10 thread for easy assembly, allows the passage of 6mm tube, ensures good sealing and easy disassembly, yellow finish for quick identification in the assembly.
5.57 RON
Nema17 motor support, metal
Nema17 motor support, metal
In Stoc
Metal bracket for quickly mounting and fixing a Nema17 42mm stepper motor, ideal for CNC, 3D printers and automation projects. Rigid metal construction for stability and reduced vibrations, easy mounting on chassis or board, precise motor alignment, compatible with standard Nema17 screws and long-term use in technical environments.
13.29 RON
T Nut EU20 M4 aluminum profile 2020
T Nut EU20 M4 aluminum profile 2020
In Stoc
M4 threaded locking element for quick and secure attachment of accessories to 2020 type aluminum profiles, inserted into the channel and ensures firm fixation without additional processing, compatible with 2020 profile and similar models, ideal for frames, 3D printers and light automation.
1.69 RON
E3D V6 aluminum support, U shape
E3D V6 aluminum support, U shape
In Stoc
Aluminum support for the E3D V6 print head, U-shaped, ensures stable mounting and correct alignment of the assembly, the material helps dissipate heat in the upper area to reduce the risk of blockages caused by softening of the filament. Lightweight and durable construction, direct compatibility with E3D V6, ideal for more reliable prints.
14.19 RON
Support plate for E3D V6 extruder, aluminum
E3D V6 extruder support plate, aluminum
In Stoc
Aluminum support for mounting the E3D V6 extruder, ensures rigid fixation and correct alignment of the print head. The metal material helps dissipate heat in the upper area, reducing the risk of clogging and improving printing reliability. Precise, lightweight and durable construction, direct compatibility with E3D V6, quick assembly in common 3D printer assemblies.
12.15 RON
Set of 5 clamping heads, with chuck, 2.35mm shaft
Set of 5 clamping heads, with chuck, 2.35mm shaft
In Stoc
Set with 2.35mm spindle chuck and 5 collets, compatible with milling machines, engraving machines and other rotary tools, allows the use of a wide range of drill bits by quick change by unscrewing. The bronze chuck is wear-resistant, securely fixed with two countersunk screws, includes Allen key, compact and easy to carry.
11.14 RON
Set of 5 clamping heads, with chuck, 3.17mm shaft
Set of 5 clamping heads, with chuck, 3.17mm shaft
In Stoc
Set with 3.17mm spindle chuck and 5 collets, for quick adaptation to different sized drills on milling machines, engraving machines and other rotary tools. Durable bronze construction, secure fastening with two screws and Allen key included, quick change of heads by unscrewing, compact format easy to transport and store.
10.38 RON
Set of 5 clamping heads, with chuck, 4.05mm shaft
Set of 5 clamping heads, with chuck, 4.05mm shaft
In Stoc
Practical set for quick attachment of drill bits to milling machines, engraving machines and other power tools, includes durable bronze chuck for 4.05mm shaft and 5 clamping heads 0.5, 1.0, 1.5, 2.5, 3.0mm , ensures wide compatibility and reduces the need for separate accessories, easy change by unscrewing the chuck and secure fixation with screws and Allen key included.
10.27 RON
Distance pillar 100mm, M4 thread, aluminum
Distance pillar 100mm, M4 thread, aluminum
In Stoc
Cylindrical aluminum spacer for stacking and fixing elements in racks or technical assemblies, length 100mm and external diameter 7mm, double M4 internal thread at both ends on about 10mm, offers precise alignment and stable support, suitable for electronics, housings and lightweight constructions.
9.86 RON
Ball joint, M4, external thread, SA4T
Ball joint, M4, external thread, SA4T
In Stoc
SA4T ball joint with M4 external thread on the right, ideal for Delta 3D printer arms and guide rods, ensures precise movement and angle compensation in mechanisms. It is made of steel for strength, has a total length of 36mm, a thread of 21mm and an inner ball diameter of 4mm.
8.32 RON
Copper Bar T2, 1.5x10x1000mm, Bus Bar
Copper Bar T2, 1.5x10x1000mm , Bus Bar
In Stoc
T2 red copper flat bar, 1.5x10x1000 mm, ideal as a bus bar for stable connections between cells in Li-ion packs, battery banks for solar panels and DIY projects. 99.9% purity for excellent conductivity and minimal voltage loss, good corrosion resistance, smooth finish for easy assembly and processing. Minimum order 4 pieces, no delivery to EasyBox.
50.35 RON