Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
DC monitor module, 9 in 1, 200VDC, Color display, IPS LCD, 30VDC, 20A
Quickly monitor the parameters of a battery or DC source directly from the panel, with a 1.14 inch IPS color display for clear reading. Measures voltage up to 200V and current up to 20A in real time, displays accumulated power, energy and capacity, plus internal resistance and temperature. Separate 6-30V power supply and menu calibration function for adjusting measurements.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Battery monitor and tester module, panel, with 1.14 inch IPS LCD screen, with a resolution of 135x240 pixels. The screen is colored and allows a better defined visualization of the measured parameters by displaying the information in different colors.
This module provides the following information:
1. DC voltage in real time
2. DC current in real time
3. Power in watts in real time
4. Accumulated energy in mWh
5. Accumulated current in mAh
6. Battery percentage capacity based on voltage
7. Accumulated operating time
8. Internal resistance
9. Module temperature
The module can measure a voltage of up to 200V DC and a current of up to 20A. The power supply will be done separately through the wire included in the package with a voltage between 6 and 30 VDC .
The percentage battery level indicator only works if the charging and discharging voltage values are defined from the menu.
In the menu, it is also possible to correct the displayed value of voltage and current, if the displayed values do not meet the requirements.
Specifications:
Supply voltage: 6 - 30VDC
Measured voltage: 0 - 200VDC
Measured current: 0.00 - 20.00A
Maximum allowed current: 20A
Measured power: 0.00 - 4000W
Measured capacity: 0 - 9999.99Ah
Measured energy: 0 - 9999.99Wh
Measured temperature: 0 - 99 degrees C (module internal temperature)
Measured time: 0 - 999:59:59 (hours:minutes:seconds)
Measured data zeroing support: Yes
Zero load support: Yes
Voltage calibration support: Yes
Current calibration support: Yes
Dimensions mm: 48 x 29 x 26mm
Panel cutout dimensions: 45 x 26mm
Use:
To enter the menu, hold down both buttons on the display. The upper button switches between functions, the lower one modifies the parameters.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (1) - Review moderation
ar fi un produs de nota 20 daca ar fi si o versiune mai actualizata cu piata adica 60V / 100A plaja aceasta fiind azi pentru majoritatea sistemelor regenerabile de casa!... Desigur poate fi adaptat cu sunturi etc dar e mai incomod calculul compensator in timp real...
