Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Brushless motor EMAX ECOII 2814, 730KV, 3-6S
Ideal for FPV drones and aerial platforms that require high traction, this 2814 730KV brushless motor offers efficient power on 3-6S, low idle current for better autonomy, supports peaks up to 50A, comes with 4mm bearings and 18AWG cables for cooling and durability, compatible with 9-10 inch propellers for fine tuning between consumption and force.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
EMAX ECOII 2814 730KV motor, ideal for FPV drones, designed to deliver reliable and efficient performance in applications requiring high thrust, such as large drones, aerial platforms or other electric propulsion systems.
It uses 4mm bearings and 18AWG power cables for the motor phases, providing an optimal combination of power, efficient cooling, and durability.
It works with 3–6S LiPo batteries and is compatible with 9 to 10 inch propellers, offering a wide range of combinations to adjust traction and consumption according to needs.
The motor has a low no-load current (1.1A at 10V), which makes it efficient even at low speeds. At peak it can reach a maximum current of up to 50A. In combination with various propellers (such as Emax Avia, HQ or Gemfan – all with 3 blades), the motor achieves thrust forces between 280g and 3300g and an efficiency of up to 6.49 g/W in moderate load regimes.
Technical specifications
Brand: EMAX
Model: ECOII 2814 – 730KV
KV: 730
Size: 2814
Compatible voltage: 3–6S LiPo (10-25.2VDC)
Motor dimensions: φ33.2 × 46.45 mm
Bearings: 4 mm
Internal frame: 12N14P
Weight: 79.7 g (without silicone cables)
Wires: 18AWG, length 250mm
No-load current (10V): 1.1 A
Internal resistance: 79 mΩ
Recommended propellers: 9 – 10 inches
Propeller shaft diameter: 5mm
Maximum power (6S): 1204 W
Maximum thrust (with HQ 1050 propeller): 3250 g
Maximum efficiency achieved: 6.49 g/W (with Emax Avia 1050 propeller)
Engine dimensions:
Propeller performance table:
Use:
The motor is firmly fixed to the frame using M3 screws. VERY IMPORTANT: When tightening the screws, BE VERY CAREFUL that the screw does not touch the motor stator (winding), as this may cause a short circuit in the winding.
Connect the power wires (18AWG) to the ESC, following the ESC's instructions and ensuring proper soldering. If the rotation is in the opposite direction, you can reverse the motor phases (wires) to get rotation in the desired direction.
Choose compatible 9"–10" propellers, preferably 3-bladed for a balance between efficiency and traction. Both the motor-to-frame mounting bolts and the propeller mounting bolt are included in the kit.
Use a LiPo battery between 3S and 6S. Check that the ESC can handle the maximum voltage and current required.
Testing: Before flying, test the engine operation at low speeds to check for unusual noises or vibrations, and especially WITHOUT PROPELLERS!
Ensure that the motor has adequate airflow in intensive applications.
Content:
1x EMAX 2814 motor with silicone wires
5x M3x8mm screws
5x M3x10mm screws
1x Propeller Nut Set
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
