Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
AC-DC power supply module kit, continuously adjustable, 0-30V, 2mA-3A, unassembled
Unassembled kit for adjustable AC-DC power supply, ideal for lab and DIY projects, offers 0-30VDC voltage and 2mA-3A current limitation for controlled power supply of loads. Through-hole components are easy to solder, PCB has clear markings for mounting, includes overcurrent and short circuit protection with LED indicator. Requires 24VAC transformer.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Unassembled kit for an adjustable AC to DC power supply that offers the ability to adjust the output voltage from 0V to 30V and the output current from 2mA to 3A. The components are of the TH (Through Hole) type, which means that it is easy to assemble, without the need for SMD soldering equipment.
ATTENTION: The module uses AC voltage for power. You need a 24VAC transformer to use the kit. Considering the fact that it uses mains voltage, this kit is NOT INTENDED FOR CHILDREN ! It can be used as soldering practice.
Many components of the kit ARE SIMILAR in appearance and size BUT THEY ARE DIFFERENT in values! Always check the inscriptions on the components before mounting them. All the components and their orientation are marked on the PCB. The kit does not come with instructions other than those written on the PCB. This product benefits from a component warranty strictly until the moment of component assembly.
It has over-current and implicitly short-circuit protection functions, ensuring the safety of connected devices, preventing any risk of burning or damage.
Specifications:
Form: Unassembled
Input Voltage: 24V AC
Input Current: Maximum 3A
Output Voltage: 0 - 30VDC, continuously adjustable
Output Current: 2mA - 3A, continuously adjustable
Output Voltage Ripple: Minimum 0.01%
Circuit Elements: All components are thru-hole type, easy to assemble
LED indicator: For over-current protection, with LED lighting when the set current is exceeded
Protections: Overload and short circuit
Assembled kit dimensions: 84 x 84mm
Use:
Follow the markings on the PCB to correctly assemble the kit. It is recommended to have basic knowledge in electronics and to use a quality letcon.
Power the kit with 24V AC , using a suitable transformer, respecting the maximum current limit of 3A.
Adjust the potentiometers to set the desired output voltage from 0V to 30V and the current from 2mA to 3A, depending on your preferences.
The LED indicator will light up to signal the overcurrent protection, activating in case of an overload or a short circuit, thus protecting the connected devices.
Used with a 2-wire transformer, Phase and Neutral are connected to the first and last pin respectively of the input connector. On the AC input in this case, the middle pin (0V) remains free.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (1) - Review moderation
Multumit !! Functioneaza bine. Este necesara racire suplimentara(radiator+ventilator).
