Imaginile produselor au caracter informativ si pot prezenta diferente minore, in functie de lot si de furnizor. Este posibil ca specificatiile si pretul produselor sa fie modificate fara preaviz. Facem tot posibilul sa adaugam in pagina produselor specificatii cat mai exacte si corecte dar este posibil ca acestea sa nu fie in totalitate corecte. in cazul in care identificati un astfel de caz, va rugam sa ne semnalati acest lucru.
Produsul este destinat specialistilor si nu include instructiuni de asamblare/utilizare. Produsul beneficiaza de garantia legala de conformitate (produsul este conform specificatiilor din site) egala cu durata de functionare medie a produsului de 14 zile de la data primirii produsului si de garantia Dead on Arrival (nefunctional la primire).
MCU2012 CP2102 USB transfer TTL communication module Mini recorder Downloader
Specificatii:
1. Original CP2102 chip, generate COM port after installing driver.
2. Connect the standard MICRO MINI-USB cable input to the computer USB interface, with two power supply outputs of 3.3V and 5V voltage
3. With self-recovery fuse. In case of accidental short circuit, it can effectively protect your downloader and computer USB port
4. On-board status indicator and transceiver indicator. The status indicator will be on when the driver is installed correctly, and the transceiver indicator will flash during communication, with running LED indicator.
5. Support baud rate from 300bps to 1Mbps
6. Communication format support: 1) 5, 6, 7, 8 data bits; 2) support 1, 1.5, 2 stop bits; 3) odd, even, mark, space, none check
7. Supported operating systems: windows 8.1/7/vista/xp/98, Mac OS-X/OS-9, Linux
8. The USB socket interface is MICRO MINI-USB socket
9. SMD components are welded by regular companies, with stable quality and beautiful appearance
10. With DTR trigger signal output, you can directly download the program communication to the Arduino motherboard such as arduino pro mini ATMEGA328P.
11. Module size: 16mm*20mm is super small.
Features:
1. With USB transceiver, no external circuit device is needed
2. Contains clock circuit, no external circuit device is required
3. Contains power-on reset circuit
4. On-chip voltage regulation can output 3.3V voltage
5. Comply with the requirements of USB2.0 specification
6. The SUSPEND pin supports USB state suspend
7. The asynchronous serial data bus is compatible with all handshake and modulation regulator interface signals
8. Supported data formats are data bit 8, stop bit 1, 2 and parity bit
9. Connotation 512 bytes receive buffer and 512 bytes transmit buffer
10. Support hardware or X-ON/X-OFF handshake
feedback Report comment