Imaginile produselor au caracter informativ si pot prezenta diferente minore, in functie de lot si de furnizor. Este posibil ca specificatiile si pretul produselor sa fie modificate fara preaviz. Facem tot posibilul sa adaugam in pagina produselor specificatii cat mai exacte si corecte dar este posibil ca acestea sa nu fie in totalitate corecte. in cazul in care identificati un astfel de caz, va rugam sa ne semnalati acest lucru.
Produsul este destinat specialistilor si nu include instructiuni de asamblare/utilizare. Produsul beneficiaza de garantia legala de conformitate (produsul este conform specificatiilor din site) egala cu durata de functionare medie a produsului de 14 zile de la data primirii produsului si de garantia Dead on Arrival (nefunctional la primire).
RGB Proximity Sensor Detection Direction Gesture APDS9930 GY-9930-3.3 Non-Contact Module
Specificatii:
Optical module with integrated ALS, infrared LED and proximity detector.
Ambient Light Sensing (ALS), approximating the visual response of the human eye.
Programmable interrupt function with upper and lower thresholds.
Up to 16-bit resolution.
High sensitivity after dark glass operation.
0.01lux low lumen performance.
Proximity detection, fully calibrated to 100 mm detection.
Integrated infrared LED and sync LED driver.
Factory calibration that eliminates proximity sensors.
Programmable wait timer, wait state power - 90μA (typ).
Programmable range from 2.7 milliseconds to more than 8 seconds.
I2C interface compatible up to 400kHz (I2C fast mode).
Dedicated interrupt pin.
Description:
The APDS-9930 provides an I2C interface-compatible ambient light sensor (ALS, Ambient Light Sensor) and proximity sensor with infrared LED in a single 8-pin package, where the ambient light sensor uses a dual photodiode to approximate low lumens at 0.01 lux illumination The performance of the human visual response provides high sensitivity that allows the device to operate behind dark glass. Proximity sensors are fully calibrated for 100 mm object inspection, eliminating the need for factory calibration of end equipment and subassemblies. From the bright sunlight to the dark room, the proximity detection function works well. The addition of micro-optical lenses to the module provides efficient transmission and reception of infrared energy, reducing overall power consumption. In addition, the internal state machine puts the device into a low-power mode, resulting in extremely low average power consumption.
Specification:
Color: red
Size: 60*80mm
Working voltage: DC 3.3-3.8V
Output current: 0-20mA
Temperature range: -40 ° C - 85 ° C
feedback Report comment