Imaginile produselor au caracter informativ si pot prezenta diferente minore, in functie de lot si de furnizor. Este posibil ca specificatiile si pretul produselor sa fie modificate fara preaviz. Facem tot posibilul sa adaugam in pagina produselor specificatii cat mai exacte si corecte dar este posibil ca acestea sa nu fie in totalitate corecte. in cazul in care identificati un astfel de caz, va rugam sa ne semnalati acest lucru.
Produsul este destinat specialistilor si nu include instructiuni de asamblare/utilizare. Produsul beneficiaza de garantia legala de conformitate (produsul este conform specificatiilor din site) egala cu durata de functionare medie a produsului de 14 zile de la data primirii produsului si de garantia Dead on Arrival (nefunctional la primire).
5m WS2812B WS2812 Led Strip 60leds Per Meter Individually Addressable Smart RGB Led Strip
Specificatii:
Package:only LED strip ,no control
Product model: WS2811 full color
Light source: SMD 5050 LED
Working voltage: DC12V
Board: FPCB black/white soft board
IC: one IC drives three LED chip
LED: each LED is controlled separately
Power consumption: maximum 0.3w per lamp bead
Gray level :256
Operating temperature: -15 to 50°
Luminous Angle: 180°
Control mode: external control
Clipping: each LED can be clipped
Color: full color RGB, dream color change 3
IC type: 5050RGB(built-out IC WS2811)
Pixels: light strip per meter (30 light /30 segment, 60 light /60 segment)
Thickness: bare plate 2mm/glue drop 3mm/sleeve 4mm
FPCB width: naked (30 light: 10mm / 60 light: 10mm )
Glue drop (30 lamp: 10mm / 60 lamp: 10mm )
Casing (30 lamp: 12mm / 60 lamp: 12mm)
Outgoing mode: SM3pin terminal head and 2 power cords
Red: 12V positive pole (VCC)
White :12V negative (GND)
Green: signal line (DATA) the two extra lines are backup power lines, red :12V positive pole/white :12V negative pole
Waterproof grade: IP30 bare board: the lamp beads exposed outside are not waterproof (there is double-sided tape on the back);
IP65 glue drop: the lamp bead is covered with high transparent resin to prevent a small amount of water splash (double-sided glue on the back)
IP67 casing: use silicone casing with good light transmission and outdoor rain protection (non-double-sided adhesive on the back) packaging: anti-static bag, naked version, double-sided adhesive on the back of drip adhesive, non-double-sided adhesive on the casing;
feedback Report comment