# Display 3.5" Ultra HD 320x480 ILI9486/ILI9488

> Display TFT color de 3.5 inch, rezolutie 320x480, afisare 65K culori pe magistrala paralela RGB 16-bit, driver ILI9486/ILI9488. Alimentare 3.3-5V cu regulator integrat, suport card SD, fara touch, dimensiune ecran 48.96 x 73.44mm, 34 pini. Compatibil cu placile ALIENTEK STM32 Mini, Elite, WarShip, Explorer si Apollo; nu se conecteaza direct la placile Arduino.

- Pagina: https://sigmanortec.ro/Display-3-5-Ultra-HD-320x480-ILI9486-ILI9488-p136248684
- Pret: 127.13 RON
- Disponibilitate: Stoc epuizat
- Cod: R-33549 · EAN: 5949186200062
- Categorie: Mecatronica si IoT > Senzori si Module > Display si LCD > Display-uri TFT
- Colet (date de livrare): 0.048 kg
- Actualizat: 2026-09-14
- Magazin: [Sigmanortec.ro](https://sigmanortec.ro/llms.txt)
- Preturi: RON, TVA inclus; preturi si stoc la data de 2026-10-22 03:38 (Europe/Bucharest)

## Descriere

Ecran TFT color de 3.5 inch pentru interfete grafice clare in proiecte STM32, cu rezolutie 320x480 si afisare 65K culori pe magistrala paralela RGB 16-bit. Functioneaza la 3.3-5V datorita regulatorului integrat, include suport pentru card SD, este compatibil cu placile ALIENTEK STM32 Mini, Elite, WarShip, Explorer si Apollo, conectare pe 34 pini.
Display LCD 3.5-inch color, cu suport 16BIT RGB 65K culori, compatibil cu placile de devoltare ALIENTEK STM32 Mini, Elite, WarShip, Explorer si Apollo.
Atentie! Display cu 34 pini. Nu este direct atasabil la placile Arduino (pentru placa Mega display-urile compatibile au 40 pini).
Pentru mai multe detalii display apasa aici
Specificatii:
Tensiune alimentare: 3.3 - 5V
Rezolutie: 320x480 resolution for clear display
Interfata: 16-bit parallel bus transmission
Driver IC: ILI9486
Touch: Nu
Dimensiuni ecran: 48.96 x 73.44mm
Tip ecran: TFT
Suport SD: Da
Compatibilitate: STM32 si platforme C51
Numar pini: 34
Descriere Pini:
Number - Pin Label - Description
1 CS LCD reset control pin( low level enable)
2 RS LCD register / data selection control pin(high level: register, low level: data)
3 WR LCD write control pin
4 RD LCD read control pin
5 RST LCD reset control pin( low level reset)
6 DB0 LCD data bus low 8-bit pin
7 DB1
8 DB2
9 DB3
10 DB4
11 DB5
12 DB6
13 DB7
14 DB8 LCD data bus high 8-bit pin
15 DB9
16 DB10
17 DB11
18 DB12
19 DB13
20 DB14
21 DB15
22 SDCS SD card selection control pin (used when using the SD card expansion function, this test program is not used)
23 BL LCD backlight control pin(High level light)
24 VDD Module power positive pin (module has integrated voltage regulator IC, so the power supply can be connected to 5V or 3.3V)
25 VDD
26 GND Module power ground pin
27 GND
28 5V LCD backlight power positive pin (default shared onboard backlight power supply, this pin can not be connected)
29 MISO Touch screen SPI bus data input pin
30 MOSI Touch screen SPI bus data output pin
31 PEN Touch screen interrupt detection pin(Low level when a touch occurs)
32 F_CS Flash chip select control pin (used when using the Flash extension function, this test program is not used)
33 T_CS Touch screen IC chip select control pin(Low level enable)
34 CLK Touch screen SPI bus clock control pin