Imaginile produselor au caracter informativ si pot prezenta diferente minore, in functie de lot si de furnizor. Este posibil ca specificatiile si pretul produselor sa fie modificate fara preaviz. Facem tot posibilul sa adaugam in pagina produselor specificatii cat mai exacte si corecte dar este posibil ca acestea sa nu fie in totalitate corecte. in cazul in care identificati un astfel de caz, va rugam sa ne semnalati acest lucru.
Produsul este destinat specialistilor si necesita personal calificat si autorizat. Produsul nu include instructiuni de asamblare/utilizare. Punerea in functiune a produsului de catre persoane necalificate duce la pierderea garantiei conform Termenilor si Conditiilor din site.
Multifunctional load tester CL24, 4 wires, 150W, 200V, color screen
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
All orders minimum 100€
CL24R electronic load tester, for testing battery capacity, checking power supplies and evaluating the performance of various electrical devices. It can also be used to determine the internal resistance of batteries, using the 4-wire method.
It supports a wide range of voltages (1V-200V) and currents (up to 25A), with a total power of 150W, offering multiple protections and an advanced heat dissipation system through a radiator and fan.
The 2.4-inch color TFT screen ensures a clear view of the test parameters, and its operation can be achieved through the integrated buttons or through the dedicated application.
This module supports connection to a PC via the USB-C port, being recognized by the PC as a HID device. For use on a PC you will need to use the dedicated application (which we provide in the Download section) which allows not only reading information but also complete control of the module. Alternatively, there is the possibility of using a WiFi or Bluetooth module, which can be purchased separately.
Features:
Supports voltages from 1V to 200V and currents up to 25A depending on voltage.
Maximum charging power: 150W (with automatic limitation for high voltage protection).
Advanced protections: Overvoltage, overcurrent, overtemperature and reverse polarity protection.
Capacity and energy measurement: Records up to 999999mAh and 999999mWh.
Active heat dissipation: Fan that runs continuously during use.
Multiple test modes: Constant Current (CC), Constant Resistance (CR), Constant Power (CP), Constant Voltage (CV), internal resistance test, power test, cable test.
Testing 1.5V AA/AAA batteries and 1V batteries as well as Lithium batteries: Allows discharging and checking capacity.
Supports cyclic testing (up to 90 cycles): Requires charge control module.
Precise control via 4 buttons and 2.4 inch TFT color display.
Four-wire wiring mode for more accurate measurements.
Specifications:
Supply voltage: 12VDC
Power plug: 5.5x2.1mm
Load voltage: DC 1V – 200V
Load current:
<1V: 0.01A – 5A≥5V: 0.01A – 25AMaximum power:
<36V: 150W36V – 80V: 60W80V – 200V: 45WCapacity measurement range: 0 – 999999mAh
Energy measurement range: 0 – 999999mWh
Screen: 2.4 inch TFT color
Wiring method: Four-wire system (A+ V+ V- A-)
Operation mode: 4 buttons for control
Protections:
OvervoltageOVERCURRENTSuperpowerOvertemperature (stops charging above 100°C, adjustable 50~120°C)Heat dissipation: Fan continuously active during operation
Dimensions mm: 156 x 96 x 55mm
Available test modes:
Constant current (CC) mode – maintains a constant current for power source verification.
Constant Resistance (CR) Mode – simulates a constant resistance for accurate testing.
Constant power (CP) mode – maintains a constant power during testing.
Constant Voltage (CV) Mode – sets a fixed test voltage.
Battery internal resistance test (BRT) – determines the internal resistance of the battery.
Power Test (PT) – measures and records power consumption.
Cable resistance test (CT) – checks voltage losses on cables.
Optional: Adding a charge control module allows cyclic testing of batteries (up to 90 cycles).
Use:
Connect the tester to the DC12V 1A/PD12V power supply included in the package.
Selecting the test mode: Use the buttons to navigate through the TFT screen menu.
Connecting the device under test: Follow the four-wire wiring diagram for accurate measurements.
Parameter setting: Configure the desired voltage, current or power.
Monitoring results: The tested values will be displayed in real time on the screen or on the PC if connected to the application.
Automatic protection: In the event of an overload, the device will automatically shut down for safety.
Reset to factory settings:
Turn on the device.
Press and hold the Start button to enter the settings menu.
Select Factory Reset and confirm.
Package contents:
Electronic load tester CL24 150W x1
2.4 interface adapter x1
External temperature probe x1
US to EU plug adapter x1
DC12V 1A power supply x1
10A crocodile clip cable for testing x1
1M PC cable for connecting to computer x1
Multi-device connection cable x1
User manual x1