Imaginile produselor au caracter informativ si pot prezenta diferente minore, in functie de lot si de furnizor. Este posibil ca specificatiile si pretul produselor sa fie modificate fara preaviz. Facem tot posibilul sa adaugam in pagina produselor specificatii cat mai exacte si corecte dar este posibil ca acestea sa nu fie in totalitate corecte. in cazul in care identificati un astfel de caz, va rugam sa ne semnalati acest lucru.
Produsul este destinat specialistilor si necesita personal calificat si autorizat. Produsul nu include instructiuni de asamblare/utilizare. Punerea in functiune a produsului de catre persoane necalificate duce la pierderea garantiei conform Termenilor si Conditiilor din site.
Video switch module, 3 channels, PV3IN1, 5V, analog
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
All orders minimum 100€
The PV3IN1 3-channel video switcher module for connecting three video sources simultaneously to the base station. This device allows fast and efficient switching between different video sources, being perfect for users who use multiple cameras on a model aircraft, drone or other equipment equipped with FPV cameras.
With the help of this module, for example, you can mount several cameras on a single VTX, being able to quickly switch between the cameras connected to the VTX that will transmit the video signal to the base station or analog glasses.
The module is interposed between the analog cameras and the VTX, it connects the cameras on demand to the VTX, the switching control is done either through a proportional channel (PWM) or through a channel with a 3-position switch, depending on the preferences and the configuration of the station your
It is equipped with a high-speed video switching chip, the module ensures stable switching.
Specifications:
Model: PV3IN1
Input voltage: 4.8-6V
Dimensions: 4.0 x 1.8 x 0.5 cm
Input channels: 3
Output channel: 1
Video signal impedance: 75Ω
Dimensions: 41 x 23mm
Net weight: 3g
Ports:
IN1, IN2, IN3: Inputs for the video signal
OUT: Output for the video signal
"-": Negative pole
"+": Suspended
"S": The digital signal from RX, for switching between channels
Use:
Connect each camera to the input ports (IN1, IN2, IN3) of the module.
Connect the signal pin (S) to the RX of the radio control, preferably using a channel connected to a 3-position switch to switch between the connected cameras. If you use a 2-position switch, you will only be able to switch between two of the video sources.
Connect the module to a power source between 4.8-6V to ensure proper operation.
Camera and VTX connection:
