Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
Smart Active Balance Module, 3-10S, Lithium, with 1A active balance, Bluetooth, 42V
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
All orders minimum 100€
Active hardware balancing module for Li-ion, LiFePO4 and LTO batteries, equipped with Bluetooth interface on RS485 and capable of a transfer between cells of up to 1A.
It can manage between 3 and 10 battery series, having a balancing current between 0-1A, with a low power consumption of 250uA and a balancing accuracy of ±20mV. It operates at temperatures between -20°C and 60°C and is equipped with RS485 and UART interfaces for communications, supporting both phone and PC applications.
Multiple operating parameters can be set from the application.
The product comes with an external Bluetooth module and balance wires with a 10S compatible plug.
Specifications:
Compatible battery type: Li-ion, LiFePO4, LTO
Swing current: 0-1A
Quiescent current: 88uA for 3-4S configurations and 300uA for 5-10S
Power consumption: 250uA for 3-10S
Conditions for activating balancing: Individual cell voltage above 3.3V (settable)
Operating temperature: -20°C to 60°C
Swing method: Active swing
Equalization accuracy: ±20mV
Communication methods: UART/RS485
Dimensions: 65 x 115 x 19mm
Use:
Make sure the module is connected correctly according to the instructions specified for the battery type.
Settings can be adjusted for the desired voltage and current using the RS485 or UART interface, via PC or phone application.
Before powering up, remove the plug from the module and solder the battery terminals. Then insert the balance plug into the module.
In case of use in a configuration less than 10S, proceed with connecting the batteries starting from the NEGATIVE terminal (0V) Then connect the rest of the cells. The wires that remain without connected terminals will remain free (in the air) but the LAST RED WIRE will be connected to the FINAL POSITIVE . Only in this way will the module be powered.
Proceed by accessing the application and setting the correct number of cells in series, followed by a RESTART of the module.
The standard password in the application for changing settings is 123456 .
Content:
1x Active Balance Module
1x Bluetooth module
1x Balance wire set suitable for 10S
