Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
QC3.0, PD3.0, 65W, Type-C, 12-30V power module
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
All orders minimum 100€
Powerbank module that offers fast charging up to 65W with support for PD3.1 (PPS), designed to provide efficient and safe charging for a wide range of devices.
It supports an input voltage from 12V to 30VDC and an automatically adjustable output voltage (depending on the charging protocol established with the device) between 3.3V and 21VDC. It automatically adapts to the requirements of the connected device, being compatible with various fast charging protocols.
CAREFUL!!! The module is not capable of raising the input voltage. To trigger 20V fast charging, the input voltage must be greater than 20V. The module offers a maximum power of 65W, being ideal for fast charging of phones, tablets and laptops.
Specifications:
Input voltage: DC 12 - 30VDC
Output voltage: Automatically negotiated between 3.3V and 21V (depending on the connected device)
Output Power: 65W Maximum (5V/3A, 9V/3A, 12V/3A, 20V/3.25A)
Conversion efficiency: 92% ~ 97%
Ripple output voltage: < 300mV
Current without load: < 2mA
Protections: Input overvoltage and undervoltage protection, output overcurrent and short circuit protection, overheating protection
Dimensions: 24 x 18mm
Supported upload protocols:
BC1.2, Apple agreements
Qualcomm QC2.0 and QC3.0
Huawei FCP and SCP
Samsung AFC
MTK PE and PE 2.0
PD2.0 / PD3.1 (PPS)
Use:
Supply the module with a DC voltage between 12V and 30V on the dedicated pins marked with + and -.
Use the Type-C port to connect your fast charging compatible device. The module will automatically adjust the output voltage depending on the connected device and the protocol negotiated by the device.
Make sure that the module works within the specified limits to avoid activating the integrated protections (overvoltage, overcurrent, short circuit, overheating). Ensure ventilation of the module to prevent its damage.
