# Display LCD 2.8, TFT, Color, Shield UNO and Mega, Touch, SD, ILI9341

> 2.8 inch color TFT display with resistive touch and microSD slot, usable as a shield on Arduino UNO and Mega boards. Resolution 240x320 pixels, 65K RGB 16-bit colors, ILI9341 driver, 8-bit parallel BUS interface, LED backlight. Integrated regulator supports 3.3V or 5V power from the host board. Dedicated pins for LCD control, 8-bit data lines and SPI interface for the SD card.

- Page: https://sigmanortec.ro/en/display-lcd-28-tft-color-shield-uno-and-mega-touch-sd-ili9341
- Price: 86.81 RON
- Availability: In stock; 1-2 zile
- Reference: 9055 · EAN: 5945958285756
- Category: Mechatronics and IoT > Sensors and Modules > Display and LCD > TFT Displays
- Package (shipping data): 0.044 kg
- Updated: 2026-09-14
- Shop: [Sigmanortec.ro](https://sigmanortec.ro/en/llms.txt)
- Prices: RON, VAT included; prices and stock as of 2026-10-22 04:32 (Europe/Bucharest)

## Description

2.8 inch TFT color display with resistive touch and microSD slot, usable as a shield on Arduino UNO and Mega boards, ideal for graphical interfaces, menus and data display in embedded projects. Offers 240x320 resolution, 65K colors with ILI9341 driver, 8-bit parallel interface for fast response and integrated regulator for 3.3-5V.
2.8 inch LCD display with touch and SD card that can be used as a shield on UNO and Mega development boards.
This display is one with resistive type touch. The integrated voltage regulator ensures compatibility with operating voltages between 3.3 and 5VDC.
Specifications:
Power supply from UNO, Mega or other compatible boards, 3.3V or 5V
Resolution: 240 x 320 pixels
Display: Color
Colors: 65K RGB 16-bit
Display size: 2.8 inches
Screen type: TFT
Driver IC: ILI9341
Interface: 8-bit Parallel BUS
Backlit lighting: LED
Pins:
1 - LCD_RST : LCD bus reset signal, low level reset
2 - LCD_CS : LCD bus chip select signal, low level enable
3 - LCD_RS : LCD bus command / data selection signal, low level: command, high level: data
4 - LCD_WR : LCD bus write signal
5 - LCD_RD : LCD bus read signal
6 - GND : Power ground
7 - 5V : 5V power input
8 - 3V3 : 3.3V power input, this pin can be disconnected
9 - LCD_D0 : LCD 8-bit data Bit0
10 - LCD_D1 : LCD 8-bit data Bit1
11 - LCD_D2 : LCD 8-bit data Bit2
12 - LCD_D3 : LCD 8-bit data Bit3
13 - LCD_D4 : 8-bit LCD data Bit4
14 - LCD_D5 : LCD 8-bit data Bit5
15 - LCD_D6 : 8-bit LCD data Bit6
16 - LCD_D7 : 8-bit LCD data Bit7
17 - SD_SS : SD card SPI bus chip select signal, low level enable
18 - SD_DI : SD card SPI bus MOSI signal
19 - SD_DO : SD card SPI bus MISO signal
20 - SD_SCK : SD card SPI bus clock signal
External references:
LcdWiki Tutorial