# Dust particle sensor, GP2Y1014AU0F, 5V

- Page: https://sigmanortec.ro/en/dust-particle-sensor-gp2y1014au0f-5v
- Price: 45.44 RON
- Availability: In stock; 1-2 zile
- Reference: 33129 · EAN: 5945827313832
- Category: Mechatronics and IoT > Sensors and Modules > Gas and Air Quality Sensors
- Specifications: Input Voltage: 5 V
- Package (shipping data): 0.021 kg
- Updated: 2026-09-14
- Shop: [Sigmanortec.ro](https://sigmanortec.ro/en/llms.txt)
- Prices: RON, VAT included; prices and stock as of 2026-10-22 05:45 (Europe/Bucharest)

## Description

Sensor for monitoring fine dust, pollen or smoke particles in Arduino projects and other development boards, operates at 5V and has analog output for fast integration, good sensitivity for air quality measurements and stable response, low current with peaks up to 20mA. Comes with cable with connector, 220uF capacitor and 150 ohm resistor for easy connection.
Particle and dust sensor, compatible with Arduino and other development boards, which can be used to detect fine particles of dust, pollen, smoke particles, and so on. It uses a SAHRP sensor and comes with a cable with a connector, a 16V 220uF capacitor and a 150 ohm resistor.
Specifications:
Supply voltage: 5VDC
Operating current: 20mA in peaks
Sensitivity: 0.5V (0.1mg/m3)
Fresh air voltage: 0.9V
Operating temperature: -10 - 65 degrees C
Dimensions mm: 46 x 30 x 17.6mm
Content:
1 x Sensor
1 x Set of wires
1 x Capacitor 16V 220uF
1 x Resistor 150 Ohm
Use:
Resistor 150 Ohm: Connects in series with VLED at 5VDC.
Capacitor 16V 220uF: It is connected to LED GND with the minus and to one end of the resistor with the plus.
Pins:
VLED: It is connected to 5V through the 150Ohm resistor
LED-GND: To GND
LED: On digital pin
S-GND: To GND
Vo: To any analog pin
Vcc: At 5VDC