# Test cables, 4 mm banana plug to crocodile clip, 1 m, 15 A, 1000 V, 2 pcs

> Set of 2 test cables with a stackable 4 mm banana plug on one end and a crocodile clip (opening ~10 mm) on the other. Length 1 m, cable diameter ~4 mm, flexible PVC insulation. Maximum current 15 A, maximum voltage 1000 V. Compatible with multimeters, laboratory power supplies and other equipment with 4 mm banana jacks, useful for measurements and quick connections in circuits.

- Page: https://sigmanortec.ro/en/test-cables-4-mm-banana-plug-to-crocodile-clip-1-m-15-a-1000-v-2-pcs
- Price: 37.21 RON
- Availability: In stock; 1-2 zile
- Reference: 88271 · EAN: 5949026410422
- Category: Electronic components > Testing and Measurement > Test Probes and Accessories
- Specifications: Nominal Current: 15 A; Cable length: 1 m; Connector type: Banana 4 mm - Clema crocodil; Maximum working voltage: 1000 V; Quantity per package: 2 buc
- Package (shipping data): 0.075 kg
- Updated: 2026-09-23
- Shop: [Sigmanortec.ro](https://sigmanortec.ro/en/llms.txt)
- Prices: RON, VAT included; prices and stock as of 2026-10-22 06:34 (Europe/Bucharest)

## Description

Ideal for measurements and quick connections in circuits, this set offers a secure transition from a 4mm stackable banana plug to a crocodile clip with a firm grip. 1 m cables with flexible PVC insulation, approx. 4 mm diameter, support up to 15A and 1000V, compatible with multimeters, laboratory power supplies, and other equipment.
This test cable set is designed to facilitate electrical measurements and quick connections in circuits, making it a useful tool for electricians, technicians, service centers, and electronics enthusiasts. Each cable has a standard 4mm banana plug at one end, with stackable capability, allowing multiple cables to be connected to the same terminal, and an alligator clip at the other end with an opening of approximately 10mm, which clamps firmly onto terminals, wires, connectors, and component pins. The cable is 1 meter long, sufficient for comfortable use on a laboratory bench, has a diameter of approximately 4mm, and flexible PVC insulation. The cables support a maximum current of 15A and a maximum voltage of 1000V, according to the manufacturer’s data.
The set is compatible with any equipment fitted with 4mm terminals or banana jacks, such as multimeters, laboratory power supplies, signal generators, laboratory chargers, and electronic loads. It is ideal for temporarily powering projects with Arduino, STM32, ESP32 boards or other development platforms directly from a laboratory power supply, for testing modules, batteries, motors, and other components without the need to solder wires.
Specifications:
End 1: 4mm standard stackable banana plug
End 2: Alligator clip, opening ~10mm
Insulation: PVC
Cable diameter: ~4mm
Maximum current: 15A
Maximum voltage: 1000V
Cable length: 1 meter (100cm)
Usage:
Visually inspect the cables before each use and do not use cables with damaged insulation, cracks, or exposed conductors.
Make sure the equipment (power supply, multimeter, or other device) is turned off or disconnected before making connections.
Insert the 4mm banana plug into the corresponding terminal of the device, following the color code (red for positive, black for negative or COM).
Attach the alligator clip to the measurement point or circuit terminal, making sure it is firmly clamped and does not touch other nearby components or conductors.
Turn on the equipment and perform the measurement or power the circuit, without exceeding the maximum current of 15A and the maximum voltage of 1000V.
After use, turn off the equipment, first remove the alligator clips from the circuit, then unplug the banana connectors from the device.
Store the cables in a dry place, without bending or twisting them excessively, to extend the life of the insulation.