# Cable with JST XH2.54 connector, 4 pins, 20 cm

> Cable with JST XH2.54 connector, 4 pins, 20 cm length, 2.54 mm pitch, female terminal. Copper conductors 30 AWG, PA66 nylon housing, brass pins. Maximum current 3A, maximum voltage 250 VDC/VAC, operating temperature -40~85°C. Suitable for low-voltage connections between development boards, sensors and LED strips using JST-XH connectors.

- Page: https://sigmanortec.ro/en/cable-with-jst-xh254-connector-4-pins-20-cm
- Price: 1.23 RON
- Availability: In stock; 1-2 zile
- Reference: 88268 · EAN: 5942582385951
- Category: Electronic components > Connectors and Cables > PCB Connectors and Terminals
- Specifications: Cable length: 20 cm; Connector type: JST XH2.54; Number of pins: 4
- Package (shipping data): 0.004 kg
- Updated: 2026-09-14
- Shop: [Sigmanortec.ro](https://sigmanortec.ro/en/llms.txt)
- Prices: RON, VAT included; prices and stock as of 2026-10-22 02:16 (Europe/Bucharest)

## Description

Ideal for quick and detachable connections in electronic projects, for development boards, sensors, or LED strips with JST-XH. It has 4 pins at a 2.54 mm pitch, a 20 cm cable for easy mounting in cases and test stands, 30 AWG copper contacts for reduced losses, a durable PA66 housing, and a clip fastening for secure attachment.
This cable with a JST XH2.54 connector is designed for secure, detachable connections in electronic projects, making it suitable for interconnecting development boards, sensors, LED strips, and other modules that use connectors with a 2.54mm. pitch.
This version has 4 pins and a cable length of 20 cm, enough for internal wiring in enclosures, mounting boxes, or test stands. The housing is made of nylon 66 (PA66), a mechanically and thermally resistant material, and the pins ensure stable electrical contact and low contact resistance. The conductors are made of copper, with a 30 AWG cross-section, and the assembly supports a maximum current of 3A and a maximum voltage of 250 VDC/VAC, with an operating temperature range between -40 and 85°C.
The female terminal mates with any 4-position JST-XH header mounted on the board, and the latch locking system prevents accidental disconnection due to vibrations or repeated handling. It is compatible with Arduino boards (UNO, Nano, Mega), ESP32, ESP8266, STM32, Raspberry Pi Pico, and most modules and sensors that use standard JST-XH connectors.
Specifications:
Connector series: XH2.54 (JST-XH compatible)
Pitch: 2.54 mm (0.1 inch)
Number of pins: 4
Connector type: Female
Conductor cross-section: 30 AWG (approximately 0.05 mm²)
Conductor material: Copper
Maximum voltage: 250 VDC/VAC
Maximum current: 3A
Housing material: Nylon 66 (PA66)
Pin material: Brass
Operating temperature: -40 ~ 85°C
Terminal dimensions: 7.5 x 12.5 x 6 mm
Cable length: 20 cm
Warning: although the connector is certified for a maximum voltage of 250 VDC/VAC, the reduced conductor cross-section (30 AWG) and insulation level make it suitable for low-voltage, signal, and DC power circuits. Do not use this cable for 220 VAC mains connections, where appropriately sized conductors and connectors approved for electrical installations are mandatory.
Contents:
1x Cable with connectors