# WS2812B addressable LED strip, IP20, 10 cm

- Page: https://sigmanortec.ro/en/ws2812b-addressable-led-strip-ip20-10-cm
- Price: 4.63 RON
- Availability: In stock; 1-2 zile
- Reference: 88262 · EAN: 5942218326273
- Category: Electronic components > LEDs, IRs and Optics > LED Matrices and Strips
- Specifications: Length: 10 cm; Protection rating: IP20; LED chip type: WS2812B
- Updated: 2026-09-14
- Shop: [Sigmanortec.ro](https://sigmanortec.ro/en/llms.txt)
- Prices: RON, VAT included; prices and stock as of 2026-10-22 01:33 (Europe/Bucharest)

## Description

Compact solution for RGB lighting effects controlled in DIY and ambient projects, with 6 SMD5050 LEDs per 10 cm, each pixel individually addressable through the integrated WS2812B controller. It operates at 5V and is easily controlled through a single data pin with Arduino, ESP32, or Raspberry Pi. Cut spacing at each LED, IP20 for indoor use.
The WS2812B addressable LED strip, without silicone, is a versatile and efficient solution for controlled lighting projects, made with SMD 5050 LEDs that integrate the WS2812B controller directly into each LED body. The strip has a density of 60 LEDs per meter, and each LED functions as an independent RGB pixel with 256 levels of gray per color channel (8 bits per color), allowing extremely fine control of color and brightness. The density of 60 LEDs per meter provides uniform and continuous coverage, suitable for ambient lighting, Ambilight-style effects, interior decorations, and DIY projects controlled by microcontrollers.
The strip is powered at 5 VDC and has a consumption of approximately 18 W per meter at maximum brightness, with a maximum current of 60 mA per LED (20 mA per color channel). The flexible board is 10 mm wide and can be cut at each LED, at the marked solder points, offering flexibility in length adjustment. The strip connects to a microcontroller such as Arduino, ESP32, or Raspberry Pi through a single data pin, using popular libraries such as Adafruit NeoPixel or FastLED. The IP20 protection rating indicates that the strip is intended exclusively for indoor use, without protection against moisture or dust.
Warning! The strip is not water resistant!
Warning! The strip is sold in multiples of 10 cm! Only the strip is delivered, without connecting wires.
Specifications:
LED chip: WS2812B
LED type: SMD 5050
Length: price per 10 cm
Total number of LEDs: 6 (for 10 cm)
LED density: 60 LEDs per meter
Supply voltage: 5 VDC
Consumption per meter: 18 W
Total consumption (5 m): 90 W
Maximum current per LED: 60 mA (20 mA per channel)
Grayscale: 256 levels (8 bits per color channel)
Number of color channels: 3 (R, G, B)
Protection rating: IP20 (indoor)
Length: 5 m
Flexible board width: 10 mm
Data protocol: serial digital signal, single wire (One Wire)
Layout:
LED Strip
Development board
Din
Microcontroller digital pin
GND
Common ground
5V
5 V power supply
Package Contents:
1x 10 cm LED strip
The strip is delivered in the ordered length. For example, for 1 full meter, order 10 pieces. The maximum length is 5 meters in one piece.