# T-Camera S3 Development Board, ESP32, Camera, OLED, PIR, Microphone

- Page: https://sigmanortec.ro/en/t-camera-s3-development-board-esp32-camera-oled-pir-microphone
- Price: 323.38 RON
- Availability: In stock; 1-2 zile
- Reference: 88083 · EAN: 5949938329379
- Category: Mechatronics and IoT > Development Board > Boards with Display and Camera
- Package (shipping data): 0.053 kg
- Updated: 2026-09-23
- Shop: [Sigmanortec.ro](https://sigmanortec.ro/en/llms.txt)
- Prices: RON, VAT included; prices and stock as of 2026-10-22 04:49 (Europe/Bucharest)

## Description

Smart board for IoT and embedded projects with video monitoring and motion detection, based on ESP32-S3 dual core with Wi-Fi and Bluetooth. Integrates OV2640 2MP HD camera, 0.96 OLED screen for status display, microphone for audio capture and PIR sensor for quick triggering. Ideal for automation, surveillance, notifications and rapid prototyping.
The LILYGO T-Camera S3 module is a smart development board based on the ESP32-S3FN16R8 microprocessor, combining high performance with advanced connectivity features. It is equipped with a 2-megapixel OV2640 HD camera and a 0.96" OLED display (SSD1306), making it ideal for projects involving facial recognition, video monitoring, IoT automation or embedded development.
It integrates a microphone and a PIR sensor for motion detection.
Specifications:
MCU: ESP32-S3FN16R8, high-performance dual-core processor
Wireless connectivity: Wi-Fi 802.11, Bluetooth 5 + BT Mesh
Programming platforms: Arduino IDE, VS Code, ESP-IDF
PSRAM memory: 8MB
Flash Memory: 16MB
OLED screen: SSD1306, 0.96 inch diagonal, 128x64 resolution, I2C protocol
OLED pins: SDA – IO07, SCL – IO06
Camera pixels: 2 megapixels
Microphone: Yes, Integrated
PIR Sensor: Yes, Integrated
Weight: 30g
Dimensions: 69x28x18.5mm
Pinout:
Usage / Programming:
First, add the camera library ( https://github.com/Xinyuan-LilyGO/LilyGo-Cam-ESP32S3/tree/master/lib ) to the Arduino IDE and install the ESP32 Arduino library.
After installing the "ESP32 Arduino" library, select the " ESP32 Dev Module " board with the following configuration:
Board -> ESP32S3 Dev Module
USB CDC On Boot -> Enable ## Note that you need to change Enable to Disable when USB is not connected, so USB CDC will not prevent the board from starting
CPU Frequency -> 240MHz
USB DFU On Boot -> Disable
Flash Mode -> QIO 80MHz
Flash Size -> 16MB(128Mb)
USB Firmware MSC On Boot -> Disable
PSRAM -> OPI PSRAM
Partition Scheme -> 16M Flash(3MB APP/9.9MB FATFS)
USB Mode -> Hardware CDC and JIAG
Upload Mode -> UART0/Hardware CDC
Upload Speed -> 921600
Connect the board to the computer via the USB type C connector and press the upload button.
Additional details:
For documentation, access the following link: https://github.com/Xinyuan-LilyGO/LilyGo-Cam-ESP32S3
Package contents:
1 x T-Camera S3 Camera with Case
1 x 2.0mm , 5-pin connector with jumper cable output
1 x JST 2.0mm connector
1 x 5-pin male header ( 2.54mm )
1 x 6-pin male header ( 2.54mm )