# PT100 temperature probe needle type, SUS304 stainless steel, FEP shielded cable, -50~200°C, class F0.15

> PT100 needle type temperature probe with SUS304 stainless steel shaft and FEP shielded cable, for measurements in liquids, solids and food. Operating range -50~200°C, tolerance class F0.15. Sealed 1/4 NPT threaded mount, detachable spring-lock connector, 1 m cable, probe diameter 4 mm x length 100 mm. 2-wire or 3-wire connection.

- Page: https://sigmanortec.ro/en/pt100-temperature-probe-needle-type-sus304-stainless-steel-fep-shielded-cable-50200c-class-f015
- Price: 59.42 RON
- Availability: In stock; 1-2 zile
- Reference: 88056 · EAN: 5943896231507
- Category: Mechatronics and IoT > Sensors and Modules > Temperature and Environmental Sensors
- Specifications: Material: Inox SUS304
- Package (shipping data): 0.029 kg
- Updated: 2026-09-14
- Shop: [Sigmanortec.ro](https://sigmanortec.ro/en/llms.txt)
- Prices: RON, VAT included; prices and stock as of 2026-10-22 05:45 (Europe/Bucharest)

## Description

PT100 needle probe for fast and accurate measurements in liquids, solids and foods, with a thin SUS304 stainless steel rod that is resistant to corrosion and easy penetration. The shielded FEP cable provides a stable signal and operation between -50 and 200°C, the 1/4 NPT watertight mounting is ideal for tanks and industrial processes, and the detachable spring-lock connector simplifies cleaning.
PT100 temperature probe with thin needle tip, designed for precise measurements in solids, liquids and food products, with fast response time and easy penetration.
The SUS304 stainless steel rod resists corrosion, and the shielded FEP cable ensures stable signal and operation up to 200°C.
The leak-proof 1/4 NPT thread mounting is ideal for environments that require leak-proofing such as brewing, biodiesel, food or industrial processes, and the detachable spring-lock connector facilitates cleaning and reduces the risk of damaging the cable when handling tanks.
Uses insulated spade terminals for secure connection to the instrument.
The PT100 RTD element offers high accuracy, nearly linear response, and good sensitivity to small temperature variations.
The PT100 probe is a resistance that varies almost linearly with temperature: at 0°C → 100 Ω, at 100°C → ~138.5 Ω.
Technical note: the PT100 element theoretically supports a wide range up to ~850°C, but the assembly is limited by the cable and FEP insulation to -50 ~ +200°C.
Specifications:
Sensitive element type: RTD PT100
Assembled probe temperature range: -50 ~ +200°C
Tolerance: F0.15
Rod material: SUS304 stainless steel
Cable material: FEP shielded, high temperature resistant
Cable length: 1 m
Mounting thread: 1/4 NPT leak-proof, compatible with BSPP and BSPT by practical threading
Connector: detachable with spring lock
Probe dimensions: diameter 4 mm x length 100 mm
Usual PT100 pinout:
Connection mode:
3 wires for cable resistance compensation:
Pin 1 and Pin 2: ends of the PT100 resistor
Pin 3: third conductor for compensation
2 wires in simple applications:
Pin 1 and Pin 2: ends of the PT100 resistor
Use:
Mount the probe into the dedicated port using the 1/4 NPT thread and PTFE tape if necessary for tightness.
Connect the terminals to the PT100 compatible instrument.
3 wires recommended for high accuracy.
2 wires accepted in less critical applications.
Ensure good thermal contact between the tip and the measured medium. Avoid tight bending of the FEP cable.
Respect the working range of -50 ~ +200°C for the entire assembly.
After use, disconnect the detachable connector for cleaning. Wipe the stainless steel rod and let it dry before reassembling.