# Addressable LED strip quick connector, 10mm, X shape, 3P

> Addressable LED strip quick connector in X shape for 10mm strips, solder-free, secured with a cap. Features 4 connectors with 3 pins each and an internal X-shaped PCB for distributing connections. Compatible with WS2811, WS2812B, WS2813, SK6812 5050 SMD RGB, supports 5V, 12V, 24V. PVC housing suitable for outdoor use. The data signal runs in only one direction.

- Page: https://sigmanortec.ro/en/addressable-led-strip-quick-connector-10mm-x-shape-3p
- Price: 16.89 RON
- Availability: In stock; 1-2 zile
- Reference: 88037 · EAN: 5942873654278
- Category: Electronic components > Connectors and Cables > LED Strip Connectors
- Package (shipping data): 0.006 kg
- Updated: 2026-09-14
- Shop: [Sigmanortec.ro](https://sigmanortec.ro/en/llms.txt)
- Prices: RON, VAT included; prices and stock as of 2026-10-22 05:21 (Europe/Bucharest)

## Description

X-shaped quick connector for 10mm addressable LED strip, allows for solderless branching and quick assembly by attaching with a cover. It has 4 3-pin sockets and internal X-shaped PCB for distributing connections, being compatible with RGB strips type WS2811, WS2812B, WS2813, SK6812. The durable PVC casing makes it suitable for outdoor installations.
Quick connector that allows for an X-shaped joint without the need for soldering, being ideal for addressable LED strip installations that require branching. It is made of outdoor-resistant PVC plastic, PCB arranged in an X-shape between the connectors, and has 4 3-pin connectors.
The connector is suitable for RGB addressable strips, but it is important to remember that the data signal in addressable strips only works in one direction. Thus, the T-connector can be successfully used with WS2812 addressable strips with the caveat that the branches will run in parallel (see picture below).
For silicone coated strips, it is necessary to remove the protective layer in the connection area to ensure proper contact.
Specifications:
Connector type: X shape
Available pins: 3PIN
Number of connectors: 4
Compatibility: WS2811, WS2812B, WS2813, SK6812 5050 SMD RGB
Supported voltage: 5V, 12V, 24V
LED strip width: 10mm
Outer material: PVC plastic
Use:
Open the connector cover and insert the LED strip into the slot.
Correctly align the contacts (+ and -) of the strip with those of the connector.
Close the lid until it snaps tightly.
For waterproof LED strips, remove the silicone layer from the contact area before connecting.
Pull the tape gently to check for proper fixation.
Attention: when used with addressable strips, respect the signal direction indicated on the PCB (arrows). The X connector distributes the power correctly, but for the data signal it is necessary to connect in line or use a signal amplifier.