# Male plug, Gold plated, 5.5x2.1 , 10A

> DC male plug (Jack) 5.5x2.1, gold plated, made of copper, with 10A rated current. Threaded plastic housing for quick assembly, accepts wires up to 3.8 mm, with a clamp that protects the solder joints. Offers high conductivity and good corrosion resistance, suitable for stable power supplies.

- Page: https://sigmanortec.ro/en/male-plug-gold-plated-55x21-10a
- Price: 14.16 RON
- Availability: In stock; 1-2 zile
- Reference: 9961 · EAN: 5944956261977
- Category: Electronic components > Connectors and Cables > Power Connectors
- Specifications: Nominal Current: 10 A
- Package (shipping data): 0.004 kg
- Updated: 2026-09-14
- Shop: [Sigmanortec.ro](https://sigmanortec.ro/en/llms.txt)
- Prices: RON, VAT included; prices and stock as of 2026-10-22 02:41 (Europe/Bucharest)

## Description

Gold-plated 5.5x2.1 male DC connector, suitable for stable power supplies up to 10A, offers high conductivity and good corrosion resistance for a durable connection. Easy to solder, accepts wires up to 3.8 mm, has a clamping clip that protects the solder joints and a plastic body with thread for quick assembly and secure fixation.
DC Tata (Male) Connector, Jack type 5.5x2.1 , made of gold-plated copper, is ideal for connections that require a stable power supply and a current of up to 10A. It offers excellent conductivity and superior corrosion resistance, ensuring a secure and durable connection.
The plug is equipped with a plastic body with a thread, which is threaded onto the metal connector after the terminals are soldered.
The connector has a robust construction and allows easy connection of wires up to 3.8mm. The metal connector features a wire clamping clamp to avoid forcing the solder joints.
Specifications:
Material: Gold-plated copper
Plug dimensions: 5.5x2.1 mm
Supported current: up to 10A
Wire compatibility: up to 3.8mm
Body: Plastic with thread
Use:
Cut and strip the ends of the wires to be connected.
Pass the wires through the plastic connector body and carefully apply solder to the pins of the metal body, taking care to observe the correct polarity. The plus is on the middle pin, the minus is on the outside (see picture).
Tighten the metal lugs onto the body of the wires (with insulation).
Screw the plastic body into the metal connector.
Connect the connector to the desired equipment, making sure in advance that the polarity is correct (in the connector hole you must have +, on the outside of the plug -.
Perfect for any electronics enthusiast or professional, this connector offers reliability, performance, and ease of use, regardless of the complexity of the project.