# Set of 2 oscilloscope test probes, X1 and X10, 100Mhz, P6100, BNC

- Page: https://sigmanortec.ro/en/set-of-2-oscilloscope-test-probes-x1-and-x10-100mhz-p6100-bnc
- Price: 92.02 RON
- Availability: In stock; 1-2 zile
- Reference: 9779 · EAN: 5948774926360
- Category: Electronic components > Testing and Measurement > Test Probes and Accessories
- Package (shipping data): 0.139 kg
- Updated: 2026-09-14
- Shop: [Sigmanortec.ro](https://sigmanortec.ro/en/llms.txt)
- Prices: RON, VAT included; prices and stock as of 2026-10-22 05:45 (Europe/Bucharest)

## Description

The P6100 2-probe set for oscilloscopes offers stable and accurate measurements, with fast 1X or 10X switching to adapt to different voltage levels. It supports measurements up to 100MHz in 10X mode and is compatible with oscilloscopes with a BNC connector. The tip is configurable as a hook or tip, and the compensation is easily adjusted from the BNC connector, with accessories included for quick identification.
Oscilloscope Probe Set, model P6100, composed of 2 probes (with the same specifications). This set includes two probes, each capable of providing reliable and high-precision measurements. The probes are versatile, supporting low frequency applications up to 6MHz and high frequency applications up to 100MHz (effective at 80MHz), ensuring extensive utility in various electronic tasks.
The probes are compatible with oscilloscopes with BNC connectors and have a switch integrated in the handle that allows selection between 1X (less than 200VDC) and 10X (less than 600VDC).
The probe tip is configurable to work with hook or tip. The hook is equipped with a spring tensioning mechanism and can be easily removed by simply pulling it out to expose the static tip.
The compensation of the probe can be adjusted from the screw present in the BNC plug. The package includes a screwdriver that allows this. Also in the package are several colored rings to differentiate the probes between them.
Specifications:
Model: P6100
Bandwidth: DC at 6 MHz and DC at 100 MHz (effectively 80 MHz)
Attenuation ratio: 1X - 10X
Input resistance: 1MΩ - 10 MΩ
Input capacity:
1X: 85 pF to 120 pF
10X: 18.5 pF to 22.5 pF
Compensation range: 10 pF to 30 pF
Rise time: Less than 3.5 ns
System bandwidth:
1X: DC-6Mhz
10X: DC-100Mhz
Operating voltage:
1X: Up to 200 V DC + peak AC Vp-p
10X: Up to 600 V DC + peak AC Vp-p
Cable length: 120 cm
Operating temperature: -10°C to +50°C
Storage temperature: -20°C to +75°C
Humidity: 5% relative humidity
Color: Grey
Use:
Firmly attach the BNC connector of the P6100 probe to your oscilloscope. Make sure the connection is tight to avoid any signal interference.
Adjust the probe settings according to the measurement requirements:
Use the 1X setting for voltages up to 200 V DC + peak AC.
Switch to 10X for higher voltage measurements, up to 600 V DC + peak AC.
Before using the probe, it is crucial to adjust the compensation to match the input capability of the oscilloscope. This can be done by adjusting the compensation screw until the waveform displayed on the oscilloscope is stable and undistorted.
Once the probe is connected and configured, you can start the measurements.
Package Contents:
2x P6100 Oscilloscope Probe
1x Adjustment screwdriver
4x colored rings (in addition to the ones already present on the probes)
2x Tip positioning tools