# Power module for APM, with BEC 5.3V, XT60, 30V, 90A

> Power module for APM 2.5/2.6/2.8 and Pixhawk flight controllers, featuring an XT60 connector, input voltage 8-29VDC (max 30V), compatible with 2S-7S LiPo batteries. Provides BEC 5.3V/3A for controller and accessories (not for servos), 90A current sensor and voltage sensor, data sent via 5V ADC to the controller through a 6-pin Molex cable. Dimensions 25x21x9mm, weight 17g.

- Page: https://sigmanortec.ro/en/power-module-for-apm-with-bec-53v-xt60-30v-90a
- Price: 43.31 RON
- Availability: In stock; 1-2 zile
- Reference: 9948 · EAN: 5941296029205
- Category: Drones and Radiomodeling > Drone Electronics
- Specifications: Nominal Current: 90 A; Maximum Input Voltage: 30 V; Output Voltage: 5.3 V; Input Voltage Type: “DC” in Romanian can mean **“de ce”**, which translates to **“why”** in English.; Output Voltage Type: “DC” in Romanian can mean **“de ce”**, which translates to **“why”** in English.
- Package (shipping data): 0.026 kg
- Updated: 2026-09-14
- Shop: [Sigmanortec.ro](https://sigmanortec.ro/en/llms.txt)
- Prices: RON, VAT included; prices and stock as of 2026-10-22 06:18 (Europe/Bucharest)

## Description

Provides stable and clean power for APM and Pixhawk directly from LiPo, while providing real-time voltage and current measurement via 6-pin Molex cable connected to PM port. Includes 5.3V up to 3A BEC for controller and accessories, XT60 connector, support up to 30V and 90A current sensor, compact and lightweight for quick installation.
Power module for APM 2.5, 2.6, 2.8 and Pixhawk that provides a simple and efficient method of providing clean power from a LiPo battery to the flight controller, along with measurements of current consumption and battery voltage, all through one cable with 6-pin molex plug.
Used with the APM flight controller, the 6-pin plug is inserted directly into the dedicated space, marked PM (Power Module). Through this port, the controller is powered and reads the information related to voltage and current in real time.
It integrates a voltage regulator that supplies 5.3V and up to 3A from a LiPo battery up to 7S, being specially designed for the APM2.5.2, APM2.6 and Pixhawk flight controllers. IMPORTANT: This module is exclusively designed to power the APM/Arduflyer controller, RC receiver and accessories such as the GPS module. It is NOT intended for powering servomotors! For this, use the ESCs of the motors or a separate BEC.
It uses a 5V ADC to communicate voltage and current to the APM flight controller.
Specifications:
Supply voltage: 8 - 29VDC
Compatible batteries: 2S - 7S Lithium Ion or Lithium Polymer (LiPo)
Battery socket: XT60
Sensor current: 90A Max
Voltage sensor: Yes, maximum 30VDC
Cable: Molex 6P, directly compatible with the PM connector of APM/Arduflyer 2.5
Voltage regulator: BULB (NOT FOR SERVOMOTORS)
BEC voltage: 5.3VDC
Maximum BEC current: 3A
Telemetry: Voltage and Current, through ADC
ADC: 5V
Dimensions: 25 x 21 x 9 mm
Weight: 17g (including all cables)