# Battery charge-discharge control module, 6-60V, 30A, CD63L30A

> CD63L30A module for battery charge-discharge control, input voltage 6-60V, maximum output current 30A. Uses a relay with optocoupler, works with either a charger or a load, with adjustable HIGH/LOW voltage thresholds and an optional timer for charging time. The display shows voltage, time and battery percentage, with no voltage conversion.

- Page: https://sigmanortec.ro/en/battery-charge-discharge-control-module-6-60v-30a-cd63l30a
- Price: 89.58 RON
- Availability: In stock; 1-2 zile
- Reference: 9512 · EAN: 5942769616267
- Category: Electronic components > Modules for Batteries > Charging and Balancing Modules
- Specifications: Maximum Input Voltage: 60; Maximum Output Current: 30 A; Input Voltage Type: “DC” in Romanian can mean **“de ce”**, which translates to **“why”** in English.
- Package (shipping data): 0.056 kg
- Updated: 2026-09-14
- Shop: [Sigmanortec.ro](https://sigmanortec.ro/en/llms.txt)
- Prices: RON, VAT included; prices and stock as of 2026-10-22 03:25 (Europe/Bucharest)

## Description

Control module for charging and discharging protection of 6-60V batteries, automatically controls a 30A relay to maintain the voltage between the set thresholds, works with both charger and consumer, has a timer for maximum charging limit, display with voltage, time and battery percentage, direct output without voltage conversion.
Control module for charging/discharging accumulators with voltages between 6VDC and 60VDC, with 30A relay with optocoupler and charging time control.
This module works both with the charger and with the consumer, having two working modes:
1. Charging mode: Charger connected to the input, battery connected to the output. The battery voltage (output) is measured and the module activates the relay to maintain the battery voltage value between the set parameters.
2. Consumer mode: Battery connected to the input, consumer connected to the output. The battery voltage on the input is measured and the module activates the relay to turn off or start the consumer depending on the battery input voltage.
This module only makes the connection between the battery and the charger, or the consumer , it does NOT change in any way the voltage and the supply current . The voltage and current on the supply will pass through the relay when it is activated and will directly connect the battery to the charger or consumer.
In order to work, the low voltage at which the module activates the relay and allows charging the battery is set and the high voltage at which the battery is charged, this causes the relay to stop and, implicitly, no longer allows the battery to be charged. The respective voltages are set manually. Optionally, the maximum charging time can also be set, this being a safety option. Once the power supply and battery are set and connected, the battery will charge and discharge continuously between the set voltages.
Important: take into account the voltage drop on the battery and the resistance of the wires when setting the minimum and maximum values. A too small difference between the "charged" voltage and the "discharged" voltage can induce a fast switching on/off behavior of the relay. The same is true if the charging current is too high. Example: If the charge voltage is set to 20V and the discharge voltage to 19V, if when the battery reaches 20V and when the charge is disconnected the voltage instantly reaches 19V, the relay will activate and deactivate in quick cycles.
It supports any type of battery that has voltages between 6 and 60VDC (Lithium, Lead, etc...).
The display shows battery voltage, charging time and battery percentage. The percentage is calculated according to the following formula: Percentage=battery voltage/(HI voltage - LOW voltage) .
If no connected battery is detected, the message NbE will be displayed.
Operation:
- Automatic charge control: The HIGH voltage ( UP ) and the LOW voltage ( dn ) are set. When the battery voltage reaches HIGH, the relay is disconnected. When the battery voltage reaches LOW, the relay is connected and charging takes place.
- Charging time control function: In the settings, apart from "UP" and "dn", there is also a third OP setting for time. It is normally disabled (--:--h) and setting it activates the time function. Once set, when the voltage reaches LOW, charging is allowed and the timer starts the clock. If, while the timer is working, battery voltage>=HIGH , the relay is deactivated and if the OP time is over and battery voltage , the relay is disabled and the H:ER error appears to remind you that the set time has stopped charging.
- To start the module, once the voltages are set, press DOWN briefly.
- Short pressing of UP during operation switches between battery percentage and time.
- Short press of SET displays the set parameters.
- Long pressing SET enters the setting mode, then short pressing SET to switch between the set values and pressing UP and DOWN changes the values (long pressing for quick change).
- Long press UP changes the operating mode: Charging mode or Consumer mode
- Long press DOWN changes the operation of the display lighting. "LP: OFF": light always off. "LP: ON": the light turns off automatically after 5-10 minutes.
Specifications:
Supply voltage: 6 - 60VDC
Controlled voltage: 6 - 61VDC
Type of output to the battery: Input voltage (Direct Output)
Controlled voltage accuracy: 0.1V
Maximum relay current: 30A
Dimensions mm: 46 x 45 x 20mm