# 16-channel relay with remote control, 12V, 433MHz

> 16-channel relay with 433MHz wireless remote control, quick pairing via the learn function. Input voltage 12V DC, output type open/closed contact, maximum load 7A per channel. Supports 3 operating modes: jog, latched and toggle. The remote uses a type 23A battery (not included). Ref. 9356.

- Page: https://sigmanortec.ro/en/16-channel-relay-with-remote-control-12v-433mhz
- Price: 213.31 RON
- Availability: In stock; 1-2 zile
- Reference: 9356 · EAN: 5946452719709
- Category: Electronic components > Relays
- Specifications: Output Type Voltage: Closed-Open Contact; Input Voltage: 12 V; Input Voltage Type: “DC” in Romanian can mean **“de ce”**, which translates to **“why”** in English.
- Package (shipping data): 0.264 kg
- Updated: 2026-09-23
- Shop: [Sigmanortec.ro](https://sigmanortec.ro/en/llms.txt)
- Prices: RON, VAT included; prices and stock as of 2026-10-22 04:14 (Europe/Bucharest)

## Description

Wireless control solution for automation, allows control of 16 relays at 12V via 433MHz remote control with fast learn pairing. Offers 3 working modes jog, latched and toggle for different scenarios. Supports maximum load 7A per channel, ideal for lighting, small motors, gates and industrial systems.
Relay 16 ch 12V composed of reception board with relay and wireless remote control 315MHz for control.
The remote control with the receiver pairs with the "learn" function.
Specifications:
Input voltage: DC 12V
Frequency: 433Mhz
Coding mode: Intelligent Learning
Maximum load: 7A
Remote control battery type: 23A (not included)
I. 3 modes of operation:
1. Jog mode / Inching:
The relay will close only when the button is kept pressed, then returning to its initial state when the button is not pressed.
2. Latched mode / self-locking:
The relay opens/closes at the push of a button. The first push of the button ON, the second OFF
3. Toggle mode /interlocked:
Keeps one of the relays active until another one is activated.
II. Steps for "learning":
1. Deleting codes:
Hold down the programming button on the receiver (relay board), the red LED will light up for about 5 seconds.
2. Choice of operating mode:
After deleting the codes (see above), keep pressing the "programming" button, the red LED will light up intermittently.
After the LED lights up once and you release the "learn" button, enter Toggle mode ; on the second ignition, release the "learn" button, enter Latched mode ; on the third ignition, enter Jog mode .
3. How to connect the board to the remote control:
1) Press the programming button on the receiver until the red LED lights up, then release the button, the red LED will remain lit.
2) Press a button on the remote control, the red LED will flash and then turn off, meaning that the pairing of the board with the remote control has been done successfully.