# MKS Gen V1.3 Motherboard, Ramps 1.4, 3D Printer

> The MKS Gen V1.3 motherboard combines MEGA2560 and Ramps 1.4 on a single PCB for controlling 3D printers. It supports up to 5 replaceable stepper drivers, compatible with A4988, DRV8825 and TMC2100. Operates at 12-24VDC, uses MOSFETs for better heat dissipation, is compatible with Marlin firmware, and supports LCD 2004 or 12864 with SD. Drivers not included. Processor: ATMega2560.

- Page: https://sigmanortec.ro/en/mks-gen-v13-motherboard-ramps-14-3d-printer
- Price: 304.90 RON
- Availability: In stock; 1-2 zile
- Reference: 9223 · EAN: 5942935180653
- Category: 3D and CNC printers > Components and Parts
- Package (shipping data): 0.123 kg
- Updated: 2026-09-23
- Shop: [Sigmanortec.ro](https://sigmanortec.ro/en/llms.txt)
- Prices: RON, VAT included; prices and stock as of 2026-10-22 03:03 (Europe/Bucharest)

## Description

Integrated motherboard for 3D printer control, combines MEGA2560 and Ramps 1.4 in a single PCB for easier wiring and increased reliability. Supports up to 5 replaceable stepper drivers compatible with A4988, DRV8825 and TMC2100, operates at 12-24VDC with dedicated power supply and efficient MOSFETs for better heat dissipation, is Marlin compatible and supports LCD 2004 or 12864 with SD.
The v1.3 motherboard is a development board used to control 3D printers. This joins the MEGA2560 plus Ramps 1.4 board into a single board, eliminating the problems derived from using two separate boards.
Supports a maximum of 5 fully replaceable stepper motor drivers. It is compatible with A4988, DRV8825 and TMC2100 drivers.
The PCB is of quality, composed of four layers, and made with an efficient heat dissipation in mind due to the use of better MOSFETs.
It uses a dedicated integrated power supply that accepts voltages of 12VDC or 24VDC, which is why, with the same board, you can switch to 24VDC, benefiting from lower mosfet temperatures due to the need for a lower current.
The board can directly replace the Mega2560+Ramps 1.4 assembly, the Marlin firmware settings being identical to those for Ramps 1.4.
Supports connection for a 2004 and 12864 LCD control panel with SD card.
It also allows connecting motors from an external motor source.
Drivers are not included.
Specifications:
Supply voltage: 12V - 24VDC
Processor: ATMega2560