Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
Reversible DC motor controller, current protection, 10A, 12V
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
All orders minimum 100€
Current control and protection module for DC (Brushed) motors, which ensures complete protection of 12VDC brushed DC motors against overload, excessive currents and short circuits. The equipment combines reliability with advanced functionality, being ideal for industrial applications, automation or DIY projects.
It has the ability to control the direction of the motor (forward/reverse) and two selectable operating modes (non-locking and self-locking), this module being the optimal solution for a safe and precise management of DC motors.
The module supports a MAXIMUM current IN SHORT PEAKS UP TO 10A, BUT NOT MORE THAN 3A IN CONTINUOUS USE!
The module is supplied with a housing (97 x 50 x 32 mm) with a mounting bracket on the rail. The integrated LED indicator facilitates monitoring the operation in real time, and the adjustment of the protection current between 0.2A and 10A (through the integrated potentiometer) offers flexibility for various applications. Its own consumption is low (40mA, excluding the motor), it is an efficient choice for motor protection.
Direction control can be configured via buttons or Microcontroller.
Specifications:
Supply voltage: DC 12VDC
Compatible motor: 12VDC brushed DC motor
Maximum current: 10A short term, 3A long term
Protection current adjustment range: 0.2A - 10A
Motor control: Forward/backward direction
Operating modes: Non-locking, self-locking
Grip: On the rail
Dimensions mm: 97 x 50 x 32mm
Use:
Connect the module terminals according to the specifications:
M+ and M- for the motor connection.
VCC (+) and GND (-) for power supply.
FWD and REV pins for motor direction control.
Select the desired working mode (Momentary/Self-locking) using the MODE jumper.
Use the ADJ potentiometer to set the protection current limit between 0.2A and 10A, depending on the application requirements.
In case of overload, the OL signal indicates the activation of the protection.
Below you can find an example of connection and direction control options via buttons or MCU. ATTENTION, THE POWER SUPPLY IS AT 12VDC!
Pinouts:
M-: Motor negative terminal
M+: Motor positive terminal
VCC: Positive power supply terminal (Power Supply +)
GND: Negative power supply terminal (Power Supply -)
COM: Common control signal terminal (GND)
FWD: Forward control
REV: Reverse control
LED: Power supply indicator
OL: Overload protection output signal (Overload signal output)
MODE: Work mode selection (Momentary/Self-locking mode selection)
ADJ: Overload current regulation
